The SP Connect Brake Mount is mounted directly onto the brake fluid reservoir cover of your motorcycle, scooter, or maxi-scooter. For installation, the existing screws of the brake fluid reservoir cover are replaced with the stainless steel screws in

The <a href="https://sp-connect.eu/collections/motorcycle/products/brake-mount?variant=47082215276885">SP Connect Brake Mount</a> is mounted directly onto the brake fluid reservoir cover of your motorcycle, scooter, or maxi-scooter.For installation, the existing screws of the brake fluid reservoir cover are replaced with the stainless steel screws included with the Brake Mount.<hr><h3 id="step-by-step-instructions">Step-by-step instructions</h3>1. Remove the existing screws<ul><li style="font-size: 16px;">Remove the screws from the cover of your brake fluid reservoir.</li></ul>2. Position the Brake Mount<ul><li style="font-size: 16px;">Place the Brake Mount onto the brake fluid reservoir cover.</li><li style="font-size: 16px;">Align the slots of the mount with the threaded holes of the reservoir.</li></ul>3. Secure the Brake Mount<ul><li style="font-size: 16px;">Depending on your vehicle model, use the supplied M4 &#xD7; 16 mm or M4 &#xD7; 18 mm Torx screws.</li><li style="font-size: 16px;">Insert the appropriate screws and tighten them evenly.</li><li style="font-size: 16px;">Use the torque specified by the vehicle manufacturer. You can find this information in the owner&apos;s manual or service manual of your vehicle. If you do not know the specified torque, please contact the vehicle manufacturer or a qualified workshop.</li></ul>4. Adjust the extension arm<ul><li style="font-size: 16px;">Loosen the central screw on the extension arm.</li><li style="font-size: 16px;">Move the extension arm into the desired position to position your smartphone optimally within your field of view.</li><li style="font-size: 16px;">Then tighten the central screw to a torque of 5 Nm.</li></ul><hr><h3 id="check-the-installation">Check the installation</h3><ul><li style="font-size: 16px;">Make sure the Brake Mount is securely mounted on the brake fluid reservoir.</li><li style="font-size: 16px;">Check that both the mounting screws and the extension arm screw are securely tightened.</li><li style="font-size: 16px;">Before every ride, check that the mount and your smartphone are securely attached.</li></ul><hr><h3 id="summary">Summary</h3>The SP Connect Brake Mount is mounted directly onto the brake fluid reservoir cover by replacing the existing screws with the supplied M4 &#xD7; 16 mm or M4 &#xD7; 18 mm stainless steel screws. The brake fluid reservoir screws must be tightened to the torque specified by the vehicle manufacturer. The extension arm can then be adjusted to the desired position and secured with a torque of 5 Nm, allowing you to position your smartphone optimally within your field of view.<hr><h3 id="further-information">Further information</h3><ul style="list-style-type: disc;"><li style="font-size: 16px;"><a href="https://cdn.shopify.com/s/files/1/1862/4277/files/MAN107_BrakeMount_90x90.pdf?v=1610637199">Manual Brake Mount</a></li></ul>

How is the Brake Mount attached to the brake fluid reservoir?

You can easily upgrade your SP Connect Brake Mount to the SP Connect Mag-Align system. The dedicated mounting head for the Brake Mount is the SP Connect Mag-Align Head C. If you also want vibration damping or wireless charging, additional upgrade opt

You can easily upgrade your <a href="https://sp-connect.eu/collections/motorcycle/products/brake-mount?variant=47082215276885">SP Connect Brake Mount</a> to the <a href="https://sp-connect.eu/collections/mag-align">SP Connect Mag-Align system</a>.The dedicated mounting head for the Brake Mount is the <a href="https://sp-connect.eu/products/mag-align-head-c">SP Connect Mag-Align Head C</a>. If you also want vibration damping or wireless charging, additional upgrade options are available.<hr><h3 id="which-upgrade-options-are-available">Which upgrade options are available?</h3>Option 1: Mag-Align Head CThe Mag-Align Head C is the standard Mag-Align solution designed for the Brake Mount. It replaces the existing mounting head and makes attaching your SP Connect Phone Case faster, easier, and more intuitive thanks to the magnetic guidance of the Mag-Align system.Option 2: Mag-Align Head A with vibration dampingThe <a href="https://sp-connect.eu/collections/mag-align/products/mag-align-head-a">SP Connect Mag-Align Head A</a> additionally features integrated vibration damping. It reduces road vibrations as well as bumps and impacts, providing a smoother and more stable mounting experience for your smartphone.To install the Mag-Align Head A on the Brake Mount, you will also need the <a href="https://sp-connect.eu/collections/spare-parts/products/sprocket-adapter">SP Connect Sprocket Adapter</a>. This must be purchased separately.Option 3: Anti Vibration ModuleThe <a href="https://sp-connect.eu/collections/motorcycle/products/anti-vibration-module">SP Connect Anti Vibration Module</a> is specifically designed to reduce high-frequency engine vibrations and provide the best possible protection for sensitive smartphone camera components. It also absorbs road vibrations, bumps, and impacts.The required Sprocket Adapter is already included with the Anti Vibration Module.Option 4: Charging Anti Vibration ModuleThe <a href="https://sp-connect.eu/products/anti-vibration-module?variant=41835866030266">SP Connect Charging Anti Vibration Module</a> provides the same protection against high-frequency engine vibrations as the Anti Vibration Module and additionally features integrated wireless charging.The required Sprocket Adapter is also included with the Charging Anti Vibration Module.<hr><h3 id="additional-benefit-of-the-mag-align-system">Additional benefit of the Mag-Align system</h3>The Mag-Align Head C, Mag-Align Head A, Anti Vibration Module, and Charging Anti Vibration Module all feature the SP Connect Mag-Align system.Integrated magnets automatically guide your SP Connect Phone Case into the correct position when attaching it. This makes mounting faster, easier, and more intuitive. The case is then securely locked in place using the proven Twist-to-Lock system.<hr><h3 id="installing-the-mag-align-head-c">Installing the Mag-Align Head C</h3>1. Remove the existing mounting head<ul><li style="font-size:16px;">Loosen the Allen screw on the mounting head.</li><li style="font-size:16px;">Completely remove the existing mounting head from the Brake Mount.</li></ul>2. Install the Mag-Align Head C<ul><li style="font-size:16px;">Place the Mag-Align Head C onto the exposed sprocket interface.</li><li style="font-size:16px;">Secure it using the designated Allen screw.</li><li style="font-size:16px;">Tighten the screw according to the instructions for the Mag-Align Head C.</li></ul><hr><h3 id="installing-upgrade-options-with-vibration-damping">Installing upgrade options with vibration damping</h3>The Mag-Align Head A, Anti Vibration Module, and Charging Anti Vibration Module are installed using a Sprocket Adapter:<ol><li style="font-size:16px;">Remove the existing mounting head from the Brake Mount.</li><li style="font-size:16px;">Place the Sprocket Adapter onto the sprocket interface of the Brake Mount.</li><li style="font-size:16px;">Insert the desired upgrade component into the Sprocket Adapter.</li><li style="font-size:16px;">Adjust the component to the desired position.</li><li style="font-size:16px;">Secure it using the specified screw and the torque stated in the corresponding manual.</li></ol><hr><h3 id="check-the-installation">Check the installation</h3><ul><li style="font-size:16px;">Make sure the new mounting head or installed module is securely attached and cannot rotate unintentionally.</li><li style="font-size:16px;">Check that all screws are correctly tightened before use.</li><li style="font-size:16px;">Before every ride, check that the mount is securely attached.</li></ul><hr><h3 id="summary">Summary</h3>For the standard upgrade of the SP Connect Brake Mount to the Mag-Align system, use the Mag-Align Head C. If you also want to reduce road vibrations, bumps, and impacts, you can use the Mag-Align Head A together with the Sprocket Adapter. For the best possible protection of sensitive smartphone camera components against high-frequency engine vibrations, we recommend the Anti Vibration Module or Charging Anti Vibration Module. The Charging Anti Vibration Module additionally provides wireless charging. All four solutions feature the SP Connect Mag-Align system, making it easier to attach your Phone Case thanks to magnetic guidance.<hr><h3 id="further-information">Further information</h3><ul style="list-style-type:disc;"><li style="font-size:16px;"><a href="https://sp-connect.eu/products/mag-align-head-c">Mag-Align Head C</a></li><li style="font-size:16px;"><a href="https://cdn.shopify.com/s/files/1/1862/4277/files/MAN238_MagAlignHeadA_90x86_web.pdf?v=1730891406">Manual Mag-Align Head A</a></li><li style="font-size:16px;"><a href="https://sp-connect.eu/collections/motorcycle/products/anti-vibration-module">Manual Anti Vibration Module</a></li><li style="font-size:16px;"><a href="https://cdn.shopify.com/s/files/1/1862/4277/files/MAN229_ChargingAntiVibrationModule_90x90_web.pdf?v=1745924134">Manual Charging Anti Vibration Module</a></li><li style="font-size:16px;"><a href="https://cdn.shopify.com/s/files/1/1862/4277/files/MAN107_BrakeMount_90x90.pdf?v=1610637199">Manual Brake Mount</a></li></ul>

How can I upgrade my Brake Mount to the SP Connect Mag-Align system?

You can easily upgrade your SP Connect SPC Brake Mount to the current SPC+ system with rounded rails without having to replace the entire mount. Only the mounting head needs to be replaced. The rest of the Brake Mount remains unchanged. For the upgra

You can easily upgrade your <a href="https://sp-connect.eu/collections/motorcycle/products/brake-mount?variant=47082215276885">SP Connect SPC Brake Mount</a> to the current SPC+ system with rounded rails without having to replace the entire mount.Only the mounting head needs to be replaced. The rest of the Brake Mount remains unchanged.For the upgrade, you will need the following product:<ul style="list-style-type:disc;"><li style="font-size:16px;"><a href="https://sp-connect.eu/collections/spare-parts/products/head-spc-plus-brake-mirror">Head SPC+ Brake, Micro Bike, Uni Bike, Mirror</a></li></ul><hr><h3 id="step-by-step-instructions">Step-by-step instructions</h3>1. Remove the old SPC head (straight rails)<ul><li style="font-size:16px;">Loosen the Allen screw on the mounting head using a suitable Allen key.</li><li style="font-size:16px;">Completely remove the existing SPC head from the Brake Mount.</li></ul>2. Install the new SPC+ head<ul><li style="font-size:16px;">Insert the Head SPC+ Brake, Micro Bike, Uni Bike, Mirror into the mounting interface of the Brake Mount.</li><li style="font-size:16px;">Make sure the head is correctly positioned and sits flush.</li></ul>3. Secure the mounting head<ul><li style="font-size:16px;">Reinsert the Allen screw.</li><li style="font-size:16px;">Tighten the screw evenly.</li><li style="font-size:16px;">Tighten the screw to a torque of 3 Nm to ensure a safe and correct installation.</li></ul><hr><h3 id="check-the-installation">Check the installation</h3><ul><li style="font-size:16px;">Make sure the new mounting head is securely installed and does not move.</li><li style="font-size:16px;">Before use, check that the screw is correctly tightened.</li><li style="font-size:16px;">Before every ride, check that the mount is securely attached.</li></ul><hr><h3 id="summary">Summary</h3>After replacing the mounting head, your SP Connect Brake Mount uses the current SPC+ system with rounded rails and is compatible with all current SP Connect Phone Cases and SP Connect Universal solutions.

I still have a classic SPC Brake Mount with straight rails. How can I upgrade to the improved system with rounded rails?

Yes. The SP Connect Brake Mount can be used on motorcycles as well as maxi-scooters, scooters, and mopeds. The brake fluid reservoir cover must meet the technical requirements of the Brake Mount. Please note that the specified tightening torque for t

Yes. The <a href="https://sp-connect.eu/collections/motorcycle/products/brake-mount?variant=47082215276885">SP Connect Brake Mount</a> can be used on motorcycles as well as maxi-scooters, scooters, and mopeds.The brake fluid reservoir cover must meet the technical requirements of the Brake Mount.<hr><h3 id="installation-requirements">Installation requirements</h3><ul style="list-style-type:disc;"><li style="font-size:16px;">Flat brake fluid reservoir cover</li><li style="font-size:16px;">Brake fluid reservoir width between 40.5 mm and 61.5 mm</li><li style="font-size:16px;">Suitable mounting screws for the specific vehicle design</li></ul>Please note that the specified tightening torque for the brake fluid reservoir screws may vary depending on the vehicle model. Always follow the vehicle manufacturer&apos;s specifications or contact an authorized workshop if you are unsure.<hr><h3 id="summary">Summary</h3>The SP Connect Brake Mount is suitable for motorcycles, maxi-scooters, scooters, and mopeds. Compatibility depends primarily on the dimensions and design of the brake fluid reservoir rather than the type of vehicle. The mount must always be installed in accordance with the vehicle manufacturer&apos;s specifications.

Can the Brake Mount also be used on a motorcycle?

SP Connect EU

Installation & Usage

Products

Motorcycle Mounts

Brake Fluid Reservoir

Brake Mount

What methods of payment are available?

Can I pay cash on delivery or on account?

The voucher code was not taken into account when I placed my order. What can I do?

How do I get a voucher code?

I didn't receive my newsletter discount code?

Why could my payment not be processed at checkout?

Why is my credit card not being accepted, even though it works on another website?

Can I place an order for SP Connect from any device?

Is it possible to receive a VAT refund in the EU?

Where can I find my tax invoice?

Payment

Received the wrong Phone Case model - what can I do?

I received a damaged item - what can I do?

I received an incorrect item. What can I do?

I ordered and received the wrong item. What can I do?

I received an incomplete order. What can I do?

Post-Purchase Issues

I want to cancel/change my order. What can I do?

My order already shipped: How can I cancel it?

Cancelling an order

I haven't received an order confirmation. What can I do?

I didn't receive an invoice for my order. What can I do?

Why didn't I receive a purchase or shipping confirmation email after placing my order?

Confirmations and invoices

Orders

How much does it cost to ship my order?

How quickly will my order be shipped?

How can I track my order?

Where is my order?

I have not received my order, although the package is considered delivered. What can I do?

How long does it take to receive my order?

My DHL shipment is marked as delivered, but I have not received it. What can I do?

My GLS shipment is marked as delivered, but I have not received it. What can I do?

Shipment

Tracking & Delivery

Phone Case

Phone Case Xtreme

Design Editions

Phone Case Accessories

Compatibility & Buying Guide

Phone Cases

Universal Interface

Universal Phone Clamp

Charging Universal Phone Clamp

Universal Phone Case

Universal Phone Holder

Universal Interface Mini

Universal Phone Case Xtreme

Universal Phone Case LT

Compatibility & Selection Guide

Universal Solutions

Compatibility

Features

Product Details

Scope Of Delivery

Tablet Case Xtreme

Cases & Universal Solutions

Buying Guide

Product Comparison

Upgrades & Accessories

Handlebar Mount

Handlebar Mount Pro

Handlebar Mount Pro MTB

Road Bike Mount Pro

Gravel Bike Mount Pro

Bike Mount

Out-Front Mounts

Universal Bike Mount

Universal Mount

Micro Bike Mount

Mounts for Handlebars & Stem

Aero Mount Pro

Micro Stem Mount Pro

Stem Mount Pro

Stem Mounts

Saddle Case Set

Wedge Case Set (Mag-Align)

Saddle Mount

Bicycle Bags

Stem Mount Flat (Cannondale Intellimount)

Stem Mount Square

Integrated Bike Mount Systems (Cannondale Intellimount, Canyon, Riese & Müller, Satori, Ergotec)

Bike Computer Adapter GAR

Bike Computer Adapter WAH

GARMIN & Wahoo Integration

Bike Front Light 270

Bike Rear Light

Camera/Light Adapter Kit

Bike Lighting & Adapters

Charging Module

Charging Anti Vibration Module

Wireless Powerbank 5000mAh

Wireless Powerbank 10000mAh

Cable 12V DC

Cable 6V DC

Cable USB-A

Cable USB-C

Bosch LPP E-Bike Cable

Wireless Charging Solutions

Bicycle Mounts

Moto Mount Pro

Moto Mount 3D

Moto Mount 3D 1 1/2"

Moto Mount LT

Bar Clamp Mount Pro

Ballhead Mount Pro

Clutch Mount Pro

Handlebar

Moto Stem Mount

Moto Stem Mount Pro

Steerer Tube

Mirror Mount

Mirror Mount Pro

Mirror

Brake Mount Large

GPS Cradle Mount

Crossbar Mount Pro

AMPS and Handlebar Crossbar

Magnetic Phone Holder Pro

Steel Fuel Tank

Anti Vibration Module

Vibration Protection

Universal Charging Phone Clamp

Wireless Powerbank 5.000mAh

Wireless Powerbank 10.000mAh

Where is the Vent Mount attached in the car?

How is the Vent Mount attached?

What are the dimensions of the Vent Mount?

Can I use the classic SPC Phone Case with the Vent Mount?

Can I attach my Apple MagSafe smartphone to the Vent Mount without an SP Connect Phone Case?

I still have a classic SPC Phone Case with straight rails. Is it compatible with the Vent Mount?

Vent Mount

What type of cable is included with the Charging Vent Mount?

What is the energy requirement of the Charging Vent Mount SPC?

I have connected my Charging Vent Mount SPC+ to a power source, but it doesn't seem to be working. Why is that and what can I do?

Can I use the classic SPC Phone Case with the Charging Vent Mount?

Can I attach my Apple MagSafe smartphone to the Charging Vent Mount without an SP Connect Phone Case?

How does the Charging Vent Mount work in the car?

Can I use the Charging Vent Mount with other USB cables?

Is the classic SPC Phone Case compatible with the Charging Vent Mount?

Can the Charging Vent Mount securely hold larger smartphones such as Galaxy Ultra/Plus and iPhone Pro Max models?

Charging Vent Mount

What type of cable is included with the Charging Suction Mount?

What is the power requirement of the Charging Suction Mount?

I have connected my Charging Suction Mount to a power source, but it is not functioning. Why is this happening and what can I do?

Can I use the classic SPC Phone Case with the Charging Suction Mount?

Can I attach my Apple MagSafe smartphone to the Charging Suction Mount without an SP Connect Phone Case?

Can I use the Charging Suction Mount with other USB cables?

How does the Charging Suction Mount work in the car?

Can the Charging Suction Mount securely hold larger smartphones such as Galaxy Ultra/Plus and iPhone Pro Max models?

Charging Suction Mount

What type of cable is included with the Charging Adhesive Mount Pro?

What is the energy requirement of the Charging Adhesive Mount Pro?

I have connected my Charging Adhesive Mount to a power source, but it doesn't seem to be working. Why is that and what can I do?

Can I use the classic SPC Phone Case with the Charging Adhesive Mount Pro?

Can I attach my Apple MagSafe smartphone to the Charging Adhesive Mount Pro without an SP Connect Phone Case?

What are the advantages of the Charging Adhesive Mount Pro, and where is it used?

How is the Charging Adhesive Mount Pro installed?

How can I remove the base plate of the Charging Adhesive Mount Pro without leaving any 3M adhesive residue?

Can I use the Charging Adhesive Mount Pro with other USB cables?

Can the Charging Adhesive Mount Pro securely hold larger smartphones such as Galaxy Ultra/Plus and iPhone Pro Max models?

Charging Adhesive Mount Pro

Where can the Roll Cage Mount be used?

How is the Roll Cage Mount installed?

Which diameters is the Roll Cage Mount compatible with?

What are the dimensions of the Roll Cage Mount?

Roll Cage Mount

What are the advantages of the Adhesive Mount Pro MA, and where can this mount be used?

How is the Adhesive Mount Pro attached?

The 3M base plate of my Adhesive Mount Pro has come loose. What can I do?

What are the dimensions of the Adhesive Mount Pro MA?

How can I remove the base plate of the Adhesive Mount MA without leaving any 3M adhesive residue behind?