I still have a classic SPC Brake Mount with straight rails. How can I upgrade to the improved system with rounded rails?Updated 2 months ago
You can easily upgrade your SP Connect SPC Brake Mount to the current SPC+ system with rounded rails without having to replace the entire mount.
Only the mounting head needs to be replaced. The rest of the Brake Mount remains unchanged.
For the upgrade, you will need the following product:
Step-by-step instructions
1. Remove the old SPC head (straight rails)
- Loosen the Allen screw on the mounting head using a suitable Allen key.
- Completely remove the existing SPC head from the Brake Mount.
2. Install the new SPC+ head
- Insert the Head SPC+ Brake, Micro Bike, Uni Bike, Mirror into the mounting interface of the Brake Mount.
- Make sure the head is correctly positioned and sits flush.
3. Secure the mounting head
- Reinsert the Allen screw.
- Tighten the screw evenly.
- Tighten the screw to a torque of 3 Nm to ensure a safe and correct installation.
Check the installation
- Make sure the new mounting head is securely installed and does not move.
- Before use, check that the screw is correctly tightened.
- Before every ride, check that the mount is securely attached.
Summary
After replacing the mounting head, your SP Connect Brake Mount uses the current SPC+ system with rounded rails and is compatible with all current SP Connect Phone Cases and SP Connect Universal solutions.