Installation & Usage
I would like to connect the Charging Module directly to my e-bike's power system. What do I need?
Several cable options are available for connecting the SP-Connect Charging Module directly to your e-bike's power system. To connect the Charging Module to the accessory or low-voltage output of an e-bike drive system, you can use the following SP Co
Can I connect the Charging Module through my e-bike display (Bosch, Yamaha, Brose, Flyer, etc.)?
In most cases, we do not recommend powering the SP-Connect Charging Module through the USB port of an e-bike handlebar display. Many e-bike displays from manufacturers such as Bosch, Yamaha, Brose or Flyer feature a USB port. However, these ports oft
Can I cut the supplied USB cable and connect the Charging Module directly to my motorcycle battery or e-bike motor?
No. The supplied SP-Connect Cable USB-C is not designed to be connected directly to a motorcycle battery or an e-bike motor. The supplied USB-C cable is intended exclusively for powering the Charging Module from a suitable USB power source. For direc
Which cables can I use with the Charging Module?
The SP-Connect Charging Module can be used with a variety of SP Connect cables, depending on whether you want to power it via a USB source or connect it directly to a motorcycle or e-bike. The following cables are available for use with a USB power s
I would like to connect the Charging Module directly to my motorcycle battery. What do I need?
To connect the SP-Connect Charging Module directly to your motorcycle battery, you will need the Cable 12V DC. The included Cable USB-C is designed exclusively for connection to a suitable USB power source. We recommend connecting the Cable 12V DC vi
The supplied USB cable for the Charging Module is too short for my motorcycle. What can I do?
If the supplied Cable USB-C (50 cm) or the optional Cable USB-A is too short for your motorcycle setup, several alternatives are available. For a permanent and clean installation, we recommend using the Cable 12V DC, which has a length of 150 cm. Alt
How is the Charging Module attached to the SP-Connect mount?
The SP-Connect Charging Module can be mounted quickly and without tools to a compatible SP Connect mount using the patented Twist-to-Lock mechanism. 1. Install the SP Connect mount. 2. Attach the Charging Module. 3. Lock the Charging Module in place.