Yes. If the SP-Connect Cable 12V DC is connected directly to the motorcycle battery, it remains connected even after the ignition has been switched off and continues to draw a very small standby current. The standby current of the Cable 12V DC is ver

Yes. If the <a href="https://sp-connect.eu/collections/electronics/products/cable-12v-dc">SP-Connect Cable 12V DC</a> is connected directly to the motorcycle battery, it remains connected even after the ignition has been switched off and continues to draw a very small standby current.<hr><h3 id="will-this-drain-my-battery">Will this drain my battery?</h3>The standby current of the Cable 12V DC is very low. However, to avoid unnecessary battery drain&#x2014;especially if the motorcycle is not used for an extended period&#x2014;we recommend connecting the cable to a switched power source (ignition-switched positive terminal).This ensures that the Cable 12V DC is only powered while the ignition is switched on. Once the motorcycle is turned off, the power supply is automatically disconnected.<hr><h3 id="recommended-installation">Recommended installation</h3>For permanent installation, we generally recommend connecting the Cable 12V DC to an ignition-switched power source. This helps prevent unnecessary battery drain during longer periods of inactivity.You can find the complete installation guide here:<ul><li style="font-size: 16px;"><a href="https://cdn.shopify.com/s/files/1/1862/4277/files/MAN142_12V_DC_Cable_90x90_web.pdf?v=1700564179"></a><a href="https://cdn.shopify.com/s/files/1/1862/4277/files/MAN142_12V_DC_Cable_90x90_web.pdf?v=1700564179" id="isPasted">Manual</a>&#xA0;Cable 12V DC</li></ul><hr><h3 id="summary">Summary</h3>If connected directly to the motorcycle battery, the SP Connect Cable 12V DC remains connected after the motorcycle is switched off and draws a very small standby current. For permanent installation, we recommend connecting it to an ignition-switched power source to help prevent unnecessary battery drain.

Does the Cable 12V DC draw power even when my motorcycle is switched off?

An additional fuse is not strictly required. However, for the safest possible installation, we recommend connecting the SP-Connect Cable 12V DC either through a 5 A fuse or to a switched power source (ignition-switched positive terminal). An addition

An additional fuse is not strictly required. However, for the safest possible installation, we recommend connecting the <a href="https://sp-connect.eu/collections/electronics/products/cable-12v-dc">SP-Connect Cable 12V DC</a> either through a 5 A fuse or to a switched power source (ignition-switched positive terminal).<hr><h3 id="why-do-we-recommend-an-additional-fuse">Why do we recommend an additional fuse?</h3>An additional fuse helps protect the wiring in the unlikely event of a short circuit and provides an extra level of electrical safety.In practice, we receive very few reports of short circuits or similar issues. However, if you would like to install your system according to common automotive electrical standards, we recommend using a 5 A fuse or connecting the cable to a switched power source.<hr><h3 id="our-recommendation">Our recommendation</h3><ul><li style="font-size: 16px;">Connect the Cable 12V DC through a 5 A fuse, or</li><li style="font-size: 16px;">Connect it to a switched power source, so it is only powered while the ignition is switched on.</li></ul>You can find the complete installation guide here:<ul><li style="font-size: 16px;"><a href="https://cdn.shopify.com/s/files/1/1862/4277/files/MAN142_12V_DC_Cable_90x90_web.pdf?v=1700564179">Cable 12V DC Installation Guide</a></li></ul><hr><h3 id="summary">Summary</h3>An additional fuse is not required to operate the SP Connect Cable 12V DC. However, for the safest and most reliable installation, we recommend connecting it through a 5 A fuse or to a switched power source.

Do I need an additional fuse when connecting the Cable 12V DC?

The SP Connect Cable 12V DC connects to the accessory or low-voltage output of a compatible e-bike drive system. It then supplies power to the SP-Connect Charging Module, the SP-Connect Charging Anti Vibration Module, or the SP-Connect Universal Char

The <a href="https://sp-connect.eu/collections/electronics/products/cable-12v-dc-plus">SP Connect Cable 12V DC</a> connects to the accessory or low-voltage output of a compatible e-bike drive system. It then supplies power to the <a href="https://sp-connect.eu/collections/electronics/products/charging-module?variant=41835865047226">SP-Connect Charging Module</a>, the <a href="https://sp-connect.eu/products/charging-module?variant=41835865079994">SP-Connect Charging Anti Vibration Module</a>, or the <a href="https://sp-connect.eu/collections/universal/products/universal?variant=41834527097018">SP-Connect Universal Charging Phone Clamp</a>.<hr><h3 id="connecting-to-your-e-bike">Connecting to your e-bike</h3>The Cable 12V DC is designed to connect to the accessory or low-voltage output of an e-bike drive system. Depending on the manufacturer, these outputs are commonly used for lights, USB chargers, trackers, alarm systems, or other accessories.<ol><li style="font-size: 16px;">First, check the output voltage of your e-bike&apos;s accessory or low-voltage output.</li><li style="font-size: 16px;">If the output provides 12 V, you can connect the Cable 12V DC to it.</li><li style="font-size: 16px;">Then connect the cable&apos;s USB-C connector to the Charging Module, Charging Anti Vibration Module, or the SP Connect Universal Charging Phone Clamp.</li></ol><hr><h3 id="important-note">Important note</h3>For a reliable power supply, we recommend using the selected accessory or low-voltage output exclusively for the Cable 12V DC.If additional devices are connected to the same output, the available power may not be sufficient. This can reduce charging performance or prevent the connected SP Connect charging system from operating correctly.Note: The Cable 12V DC is designed exclusively for 12 V accessory or low-voltage outputs. If your e-bike has a 6 V output, use the <a href="https://sp-connect.eu/collections/electronics/products/cable-6v-dc-plus" id="isPasted">SP-Connect</a> <a href="https://sp-connect.eu/collections/electronics/products/cable-6v-dc-plus">Cable 6V DC</a> instead. For compatible Bosch e-bike systems with a Low Power Port (LPP), we recommend the <a href="https://sp-connect.eu/collections/electronics/products/bosch-lpp-e-bike-cable" id="isPasted">SP-Connect</a> <a href="https://sp-connect.eu/collections/electronics/products/bosch-lpp-e-bike-cable">Bosch LPP E-Bike Cable</a>.<hr><h3 id="summary">Summary</h3>The SP Connect Cable 12V DC connects to a compatible e-bike drive system&apos;s 12 V accessory or low-voltage output and supplies power to the Charging Module, Charging Anti Vibration Module, or the SP Connect Universal Charging Phone Clamp. For a reliable power supply, no additional devices should ideally be connected to the same output.

How do I connect the Cable 12V DC to my e-bike motor?

The SP-Connect Cable 12V DC is connected to your motorcycle's electrical system using the two open wire leads. For reliable operation while protecting your battery, we recommend connecting it to a switched ignition power source. Connecting the Cable

The <a href="https://sp-connect.eu/collections/electronics/products/cable-12v-dc-plus">SP-Connect Cable 12V DC</a> is connected to your motorcycle&apos;s electrical system using the two open wire leads. For reliable operation while protecting your battery, we recommend connecting it to a switched ignition power source.<hr><h3 id="recommended-connection-method">Recommended connection method</h3>Connecting the Cable 12V DC to a switched ignition power source ensures that the connected SP Connect charging system only receives power when the ignition is switched on.This prevents the Cable 12V DC from remaining permanently powered after the motorcycle has been switched off, helping to avoid unnecessary battery drain.<hr><h3 id="important-note">Important note</h3>The connection to your motorcycle&apos;s electrical system should be carried out correctly. If you are unsure about the installation or do not know where to find a suitable switched ignition power source on your motorcycle, we recommend having the installation performed by a qualified motorcycle workshop.<hr><h3 id="summary">Summary</h3>For operating the SP Connect Cable 12V DC, we recommend connecting it to a switched ignition power source. This ensures that the charging system is only powered when the ignition is switched on, helping to protect your motorcycle&apos;s battery. If you are unsure about the installation, have it carried out by a qualified motorcycle workshop.<hr><h3 id="additional-information">Additional information</h3><ul><li style="font-size: 16px;"><a href="https://cdn.shopify.com/s/files/1/1862/4277/files/MAN142_12V_DC_Cable_90x90_web.pdf?v=1700564179"></a><a href="https://cdn.shopify.com/s/files/1/1862/4277/files/MAN142_12V_DC_Cable_90x90_web.pdf?v=1700564179" id="isPasted">Manual</a>&#xA0;Cable 12V DC&#xA0;</li></ul>

How do I connect the Cable 12V DC to my motorcycle battery?

Yes, you can shorten the open end of the SP-Connect Cable 12V DC to suit your installation requirements.

Yes, you can shorten the open end of the <a href="https://sp-connect.eu/collections/electronics/products/cable-12v-dc-plus">SP-Connect Cable 12V DC</a> to suit your installation requirements.<hr><h3 id="important-information">Important information</h3><ul><li style="font-size: 16px;">The voltage conversion components are located inside the USB-C connector.</li><li style="font-size: 16px;">Shortening the open end of the cable will therefore not affect its functionality.</li></ul><h3 id> </h3>

Can I shorten the Cable 12V DC?

SP Connect EU

Installation & Usage

Products

Electronics

Cables

Cable 12V DC

What methods of payment are available?

Can I pay cash on delivery or on account?

The voucher code was not taken into account when I placed my order. What can I do?

How do I get a voucher code?

I didn't receive my newsletter discount code?

Why could my payment not be processed at checkout?

Why is my credit card not being accepted, even though it works on another website?

Can I place an order for SP Connect from any device?

Is it possible to receive a VAT refund in the EU?

Where can I find my tax invoice?

Payment

Received the wrong Phone Case model - what can I do?

I received a damaged item - what can I do?

I received an incorrect item. What can I do?

I ordered and received the wrong item. What can I do?

I received an incomplete order. What can I do?

Post-Purchase Issues

I want to cancel/change my order. What can I do?

My order already shipped: How can I cancel it?

Cancelling an order

I haven't received an order confirmation. What can I do?

I didn't receive an invoice for my order. What can I do?

Why didn't I receive a purchase or shipping confirmation email after placing my order?

Confirmations and invoices

Orders

How much does it cost to ship my order?

How quickly will my order be shipped?

How can I track my order?

Where is my order?

I have not received my order, although the package is considered delivered. What can I do?

How long does it take to receive my order?

My DHL shipment is marked as delivered, but I have not received it. What can I do?

My GLS shipment is marked as delivered, but I have not received it. What can I do?

Shipment

Tracking & Delivery

Phone Case

Phone Case Xtreme

Design Editions

Phone Case Accessories

Compatibility & Buying Guide

Phone Cases

Universal Interface

Universal Phone Clamp

Charging Universal Phone Clamp

Universal Phone Case

Universal Phone Holder

Universal Interface Mini

Universal Phone Case Xtreme

Universal Phone Case LT

Compatibility & Selection Guide

Universal Solutions

Compatibility

Features

Product Details

Scope Of Delivery

Tablet Case Xtreme

Cases & Universal Solutions

Buying Guide

Product Comparison

Upgrades & Accessories

Handlebar Mount

Handlebar Mount Pro

Handlebar Mount Pro MTB

Road Bike Mount Pro

Gravel Bike Mount Pro

Bike Mount

Out-Front Mounts

Universal Bike Mount

Universal Mount

Micro Bike Mount

Mounts for Handlebars & Stem

Aero Mount Pro

Micro Stem Mount Pro

Stem Mount Pro

Stem Mounts

Saddle Case Set

Wedge Case Set (Mag-Align)

Saddle Mount

Bicycle Bags

Stem Mount Flat (Cannondale Intellimount)

Stem Mount Square

Integrated Bike Mount Systems (Cannondale Intellimount, Canyon, Riese & Müller, Satori, Ergotec)

Bike Computer Adapter GAR

Bike Computer Adapter WAH

GARMIN & Wahoo Integration

Bike Front Light 270

Bike Rear Light

Camera/Light Adapter Kit

Bike Lighting & Adapters

Charging Module

Charging Anti Vibration Module

Wireless Powerbank 5000mAh

Wireless Powerbank 10000mAh

Cable 6V DC

Cable USB-A

Cable USB-C

Bosch LPP E-Bike Cable

Wireless Charging Solutions

Bicycle Mounts

Moto Mount Pro

Moto Mount 3D

Moto Mount 3D 1 1/2"

Moto Mount LT

Bar Clamp Mount Pro

Ballhead Mount Pro

Clutch Mount Pro

Handlebar

Moto Stem Mount

Moto Stem Mount Pro

Steerer Tube

Mirror Mount

Mirror Mount Pro

Mirror

Brake Mount

Brake Mount Large

Brake Fluid Reservoir

GPS Cradle Mount

Crossbar Mount Pro

AMPS and Handlebar Crossbar

Magnetic Phone Holder Pro

Steel Fuel Tank

Anti Vibration Module

Vibration Protection

Universal Charging Phone Clamp

Wireless Powerbank 5.000mAh

Wireless Powerbank 10.000mAh

Motorcycle Mounts

Where is the Vent Mount attached in the car?

How is the Vent Mount attached?

What are the dimensions of the Vent Mount?

Can I use the classic SPC Phone Case with the Vent Mount?

Can I attach my Apple MagSafe smartphone to the Vent Mount without an SP Connect Phone Case?

I still have a classic SPC Phone Case with straight rails. Is it compatible with the Vent Mount?

Vent Mount

What type of cable is included with the Charging Vent Mount?

What is the energy requirement of the Charging Vent Mount SPC?

I have connected my Charging Vent Mount SPC+ to a power source, but it doesn't seem to be working. Why is that and what can I do?

Can I use the classic SPC Phone Case with the Charging Vent Mount?

Can I attach my Apple MagSafe smartphone to the Charging Vent Mount without an SP Connect Phone Case?

How does the Charging Vent Mount work in the car?

Can I use the Charging Vent Mount with other USB cables?

Is the classic SPC Phone Case compatible with the Charging Vent Mount?

Can the Charging Vent Mount securely hold larger smartphones such as Galaxy Ultra/Plus and iPhone Pro Max models?

Charging Vent Mount

What type of cable is included with the Charging Suction Mount?

What is the power requirement of the Charging Suction Mount?

I have connected my Charging Suction Mount to a power source, but it is not functioning. Why is this happening and what can I do?

Can I use the classic SPC Phone Case with the Charging Suction Mount?

Can I attach my Apple MagSafe smartphone to the Charging Suction Mount without an SP Connect Phone Case?

Can I use the Charging Suction Mount with other USB cables?

How does the Charging Suction Mount work in the car?

Can the Charging Suction Mount securely hold larger smartphones such as Galaxy Ultra/Plus and iPhone Pro Max models?

Charging Suction Mount

What type of cable is included with the Charging Adhesive Mount Pro?

What is the energy requirement of the Charging Adhesive Mount Pro?

I have connected my Charging Adhesive Mount to a power source, but it doesn't seem to be working. Why is that and what can I do?

Can I use the classic SPC Phone Case with the Charging Adhesive Mount Pro?

Can I attach my Apple MagSafe smartphone to the Charging Adhesive Mount Pro without an SP Connect Phone Case?

What are the advantages of the Charging Adhesive Mount Pro, and where is it used?

How is the Charging Adhesive Mount Pro installed?

How can I remove the base plate of the Charging Adhesive Mount Pro without leaving any 3M adhesive residue?

Can I use the Charging Adhesive Mount Pro with other USB cables?

Can the Charging Adhesive Mount Pro securely hold larger smartphones such as Galaxy Ultra/Plus and iPhone Pro Max models?

Charging Adhesive Mount Pro

Where can the Roll Cage Mount be used?

How is the Roll Cage Mount installed?

Which diameters is the Roll Cage Mount compatible with?

What are the dimensions of the Roll Cage Mount?

Roll Cage Mount

What are the advantages of the Adhesive Mount Pro MA, and where can this mount be used?

How is the Adhesive Mount Pro attached?

The 3M base plate of my Adhesive Mount Pro has come loose. What can I do?

What are the dimensions of the Adhesive Mount Pro MA?

How can I remove the base plate of the Adhesive Mount MA without leaving any 3M adhesive residue behind?