Installation & Usage
How is the Aero Mount Pro attached to the bicycle stem?
The SP-Connect Aero Mount Pro is mounted directly onto your bike stem using the original 3M adhesive pad. A smooth, clean, and grease-free surface with a minimum size of 55 mm x 30 mm is required. 1. Prepare the surface. 2. Position the mount. 3. Att
Can I transfer the Aero Mount Pro to a second bike after it has already been mounted on another bike?
No. The SP-Connect Aero Mount Pro is mounted using an original 3M adhesive pad, which is designed for permanent installation and single use only. Once the mount has been applied and later removed, the adhesive bond can no longer be restored to the re
How can I remove the Aero Mount Pro from my bicycle without leaving residue?
To remove the SP-Connect Aero Mount Pro as cleanly as possible from your stem, follow these steps:. 1. Heat the adhesive. 2. Remove the mount. 3. Avoid cold removal. 4. Clean any residue. The Aero Mount Pro can be removed in a clean and surface-frien
How can I upgrade my Aero Mount Pro to the SP-Connect Mag-Align system?
You can easily upgrade your SP-Connect Aero Mount Pro to the Mag-Align system. For the upgrade, you will need the following item:. Please note: The Mag-Align Adapter is not included with the Aero Mount Pro and must be purchased separately. 1. Attach
I still have a classic SPC Aero Mount Pro with straight rails. How can I upgrade to the new system with rounded rails?
A dedicated upgrade head to convert the SPC Aero Mount Pro (with straight rails) to the current system is unfortunately not available for technical reasons. However, you can continue using your SPC Aero Mount Pro with SP Connect Phone Cases and Unive