Charging & Performance
My Charging Anti Vibration Module only charges intermittently or not at all. What can I do?
If your SP Connect Charging Anti Vibration Module only charges intermittently or does not start charging at all, you can narrow down the cause with a few simple troubleshooting steps. The quickest way to identify the cause is to test the Charging Ant
My Charging Anti Vibration Module charges too slowly. What can I do?
The SP Connect Charging Anti Vibration Module supports wireless charging at up to 15 W. However, the actual charging power may vary depending on the smartphone, power source and operating conditions. This is normal with wireless charging and does not
Does the Charging Anti Vibration Module consume power when no smartphone is mounted?
Yes. If you connect the SP Connect Charging Anti Vibration Module directly to the motorcycle battery using the Cable 12V DC, a small standby current may continue to flow even after the smartphone has been removed. This is due to the technical design
What are the power requirements of the Charging Anti Vibration Module?
The SP Connect Charging Anti Vibration Module requires an input of at least 5 V / 2 A (minimum 10 W) for reliable operation. For regular operation of the Charging Anti Vibration Module, the power source used should provide at least the following outp
What charging power does the Charging Anti Vibration Module provide?
The SP Connect Charging Anti Vibration Module provides wireless charging power of up to 15 W. The actual charging power may vary depending on the operating conditions. The Charging Anti Vibration Module can provide wireless charging at up to 15 W. Ho