Charging & Performance
My Charging Anti Vibration Module charges only intermittently or not at all. What can I do?
If your SP-Connect Charging Anti Vibration Module charges only intermittently or does not start charging at all, the following steps can help identify the cause of the issue. The quickest way to troubleshoot is to connect the Charging Anti Vibration
My Charging Anti Vibration Module charges too slowly. What can I do?
The SP-Connect Charging Anti Vibration Module supports wireless charging with up to 15 W. However, the actual charging speed may vary depending on your smartphone, power source, and operating conditions. This is normal for wireless charging and does
Does the Charging Anti Vibration Module draw power when no smartphone is mounted?
Yes. If you connect the SP-Connect Charging Anti Vibration Module directly to your motorcycle battery using the SP-Connect Cable 12V DC, a small standby current may continue to flow even after the smartphone has been removed. This is normal and occur
What are the power requirements of the Charging Anti Vibration Module?
The SP-Connect Charging Anti Vibration Module requires a minimum power input of 5 V / 2 A (at least 10 W) for reliable operation. For normal operation, the power source should provide at least:. If the power source cannot provide this level of output
What charging power does the Charging Anti Vibration Module provide?
The SP-Connect Charging Anti Vibration Module provides wireless charging with up to 15 W. The actual charging speed may vary depending on several factors:. The Charging Anti Vibration Module supports wireless charging with up to 15 W. Actual charging