Charging Adhesive Mount Pro
What type of cable is included with the Charging Adhesive Mount Pro?
The Charging Adhesive Mount Pro comes with a 50cm long USB-C/USB-C (PD & QC 3.0) cable.
What is the energy requirement of the Charging Adhesive Mount Pro?
The Charging Adhesive Mount Pro requires a minimum input voltage of 5 volts / 2 amps. For fast charging at 7.5W or 10W, an adapter with a minimum output of 9 volts / 1.67 amps is needed. To optimize fast charging, we recommend using a Quick Charge 2.
I have connected my Charging Adhesive Mount to a power source, but it doesn't seem to be working. Why is that and what can I do?
If your Charging Adhesive Mount Pro is connected to a power source but the LED on the back of the charging disc does not light up, the issue may be due to one of the following factors:. Please first verify that the power source has an output of 5V/2A
Can I use the classic SPC Phone Case with the Charging Adhesive Mount Pro?
Unfortunately, no. The classic SPC Phone Case does not have a magnetic mechanism and therefore cannot be used with the Charging Adhesive Mount. You need the designated SPC+ Phone Case for your smartphone model.
Can I attach my Apple MagSafe smartphone to the Charging Adhesive Mount Pro without an SP Connect Phone Case?
Yes, this is generally possible. Thanks to the integrated magnet in Apple MagSafe smartphones, you can attach your device to the Charging Adhesive Mount Pro even without an SP Connect Phone Case. However, please note that we provide no guarantee for
What are the advantages of the Charging Adhesive Mount Pro, and where is it used?
The Charging Adhesive Mount Pro offers maximum convenience and safety for in-vehicle use.The mount is securely attached to your car’s dashboard using a high-quality 3M™ adhesive pad, ensuring a stable, vibration-free installation. The magnetic interf
How is the Charging Adhesive Mount Pro installed?
First, choose a smooth and flat surface on the dashboard of your vehicle.Clean this area thoroughly so the 3M™ adhesive pad can adhere properly. For best results, use a soft cloth and some isopropyl alcohol (cleaning alcohol, 70% or higher) to comple
How can I remove the base plate of the Charging Adhesive Mount Pro without leaving any 3M adhesive residue?
To remove the base plate of the Charging Adhesive Mount Pro, we recommend gently warming the adhesive area with a hair dryer or heat gun on a low setting. This softens the 3M adhesive, allowing the mount to be lifted off more slowly and evenly withou
Can I use the Charging Adhesive Mount Pro with other USB cables?
Yes. In general, you can also use the Charging Adhesive Mount Pro with other USB cables. However, for the best and most reliable performance, we recommend using the included USB-C to USB-C cable (50 cm), as it is optimally matched to the Charging Adh