Which brake and clutch clamps is the Clutch Mount Pro compatible with?Updated 2 months ago
The SP Connect Clutch Mount Pro is mounted directly to the brake or clutch clamp of your motorcycle and is suitable for fittings with a compatible ¼”-20 UNC or M6 mounting thread.
The Clutch Mount Pro comes with the following mounting screws:
- ¼”-20 UNC
- M6 × 37 mm
This allows the Clutch Mount Pro to be installed on various brake and clutch fittings with a corresponding mounting thread.
What requirements does my brake or clutch clamp need to meet?
For correct installation, the mounting point of your brake or clutch clamp must be compatible with one of the screws supplied with the Clutch Mount Pro.
- The fitting must have a suitable mounting point with a ¼”-20 UNC or M6 thread.
- The required screw length and thread engagement must be suitable for the respective brake or clutch fitting.
- The Clutch Mount Pro must be able to sit flush against the fitting and be securely installed.
- The mount must not interfere with the operation or freedom of movement of the brake lever, clutch lever or any other controls.
How do I know which screw I need?
First, check the original screw used on your brake or clutch clamp and compare its thread, diameter and required length with the screws supplied with the Clutch Mount Pro.
Information about the required mounting hardware and specified tightening torque can usually be found in the owner’s manual or service manual of your motorcycle. Alternatively, contact your motorcycle manufacturer or a qualified motorcycle workshop.
Important note
Whether the Clutch Mount Pro can be installed on a specific motorcycle depends on the design of the respective brake or clutch fitting. A matching thread size alone therefore does not necessarily guarantee compatibility.
Only use a screw whose thread and length are suitable for the respective fitting. The mounting screw must be tightened to the torque specified by the motorcycle or component manufacturer.
If you are unsure about the thread, screw length, thread engagement or installation, we recommend contacting your motorcycle manufacturer or a qualified motorcycle workshop.
Summary
The SP Connect Clutch Mount Pro is mounted to the brake or clutch clamp of your motorcycle and comes with screws for ¼”-20 UNC and M6 × 37 mm mounting applications. For correct installation, the thread, screw length and thread engagement must be suitable for the respective fitting, and the mount must be securely installed without interfering with the operation of the brake or clutch controls.