The clearance between the arm and clamp is too low on my motorcycle. What can I do?Updated 2 months ago
The SP Connect Moto Mount Pro includes two height adapters:
- 5 mm height adapter (pre-installed)
- 10 mm height adapter (included)
The Moto Mount Pro comes with the 5 mm height adapter pre-installed. If the clearance between the clamp and the arm is too small due to the handlebar shape, clamp blocks or cables, you can simply replace the pre-installed height adapter with the included 10 mm height adapter. This increases the distance between the clamp and arm and provides additional clearance for secure installation.
Step-by-step instructions
1. Remove the arm
- Loosen the arm mounting screw and remove the arm from the clamp.
2. Replace the height adapter
- Remove the pre-installed 5 mm height adapter.
- Insert the included 10 mm height adapter.
3. Reinstall the arm
- Attach the arm to the clamp again.
- Tighten the screw to the torque specified in the manual.
Check the fit
- Make sure the arm has sufficient clearance from clamp blocks, cables and other components.
- Before every ride, check that the screw connection is securely tightened.
Summary
The SP Connect Moto Mount Pro includes a 5 mm height adapter (pre-installed) and a 10 mm height adapter. If the standard clearance is not sufficient for your installation, the 5 mm height adapter can simply be replaced with the 10 mm version. This provides additional clearance between the clamp and arm.