Is the Universal Interface Mini compatible with the SP Connect Anti Vibration Module?Updated 24 days ago

Yes.
The Universal Interface Mini can be used flawlessly with the SP Connect Anti Vibration Module.

Below you will find instructions for safe installation.

1) Attaching the Universal Interface Mini to your device

We recommend attaching the Universal Interface Mini to a flat and smooth surface.
The original 3M adhesive reliably bonds to plastic, glass, metal and painted surfaces.

Important notes for attaching it to your device:

A smooth surface is required to securely attach the Universal Interface Mini.
Clean the surface thoroughly with the included alcohol wipe before attaching the interface.
Press the mount firmly for at least 30 seconds to ensure optimal adhesion.
As the interface is not repositionable, make sure it is correctly aligned before applying it.
Do not fully load the adapter for several hours so that the adhesive can reach its full bonding strength (depending on the ambient temperature).

Important notes for attaching it to the Anti Vibration Module:

Before installation, make sure that the Universal Interface Mini is already firmly attached to the device you want to use with the SP Connect system.
Then mount the Anti Vibration Module together with the appropriate SP Connect mount to your vehicle.
Place the mechanism of the Universal Interface Mini flat and completely onto the mount of the Anti Vibration Module.
Make sure the mechanism is correctly seated in the mount, then turn the Universal Interface Mini 90° clockwise until it locks into position.
Once locked, your device is securely and firmly connected to the Anti Vibration Module.

Was this article helpful?

Yes