Is the Stem Mount Flat compatible with the Universal Charging Phone Clamp?Updated a month ago
Yes. The SP-Connect Stem Mount Flat (Cannondale Intellimount) is compatible with the SP-Connect Universal Charging Phone Clamp .
Please note: The Universal Charging Phone Clamp is not included with the Stem Mount Flat and must be purchased separately.
Step-by-step Instructions
1. Mount the Stem Mount Flat
- Install the Stem Mount Flat onto the Cannondale Three Stem Intellimount of your Cannondale bicycle
- Make sure the mount is securely and firmly attached
2. Prepare the Universal Charging Phone Clamp
- Pull out the crown of the Universal Charging Phone Clamp to open the clamping mechanism and adjust it to the size of your smartphone
3. Insert and secure your smartphone
- Insert your smartphone into the Universal Charging Phone Clamp
- Turn the adjustment screw until your smartphone is held securely and firmly
4. Lock the setting
- Push the crown back in to lock the setting and permanently secure your smartphone
5. Attach the Universal Charging Phone Clamp
- Place the Universal Charging Phone Clamp including your smartphone flat (fully) onto the interface of the Stem Mount Flat
- Rotate the clamp 90° until it clicks into the locked position
6. Connect power supply
- Connect the Universal Charging Phone Clamp to a suitable power source
Check the fit
- Before riding, check that all components are properly locked
- Ensure that both the clamp and the smartphone are securely attached
Result
Your smartphone is now securely mounted and will charge while riding.
Further Information