Is the Stem Mount Flat (Cannondale Intellimount) compatible with the Charging Module?Updated a month ago
Yes. The SP-Connect Stem Mount Flat (Cannondale Intellimount) is fully compatible with the SP-Connect Charging Module.
Please note: The Charging Module is not included with the Stem Mount Flat and must be purchased separately.
Step-by-step Instructions
1. Mount the Stem Mount Flat
- Install the Stem Mount Flat onto the Cannondale Three Stem Intellimount of your Cannondale bicycle
- Make sure the mount is securely and firmly attached
2. Attach the Charging Module
- Place the lower mechanism of the Charging Module flat (fully) onto the interface of the Stem Mount Flat
- Rotate the Charging Module 90° until it clicks into the locked position
3. Attach your smartphone
- Place the mechanism of your SP Connect Phone Case flat onto the Charging Module
- Rotate it 90° until it is securely locked into place
4. Connect power supply
- Connect the Charging Module to a suitable power source
Check the fit
- Before riding, check that all components are properly locked
- Ensure that both the Charging Module and the smartphone are securely attached
Result
Your smartphone is now securely mounted and will charge while riding.
Further Information