Is the Moto Stem Mount compatible with the Charging Module?Updated 2 months ago
Yes. The SP Connect Moto Stem Mount is fully compatible with the SP Connect Charging Module.
Please note: The Charging Module is not included with the Moto Stem Mount and must be purchased separately.
We recommend fully installing the Moto Stem Mount on your motorcycle before attaching the Charging Module.
Step-by-step instructions
1. Install the Moto Stem Mount
- Install the Moto Stem Mount on your motorcycle.
- Make sure the mount is firmly and securely installed.
2. Install the Charging Module
- Place the lower mechanism of the Charging Module flat (fully) onto the mounting head of the Moto Stem Mount.
- Rotate the Charging Module by 90° until it clicks into the locked position.
3. Attach your smartphone
- Place the mechanism of your SP Connect Phone Case flat onto the Charging Module.
- Rotate the Phone Case by 90° until it is securely locked in place.
4. Connect the power supply
- Connect the Charging Module to a suitable power source.
Check the installation
- Make sure all components are securely installed.
- Before use, check that the Charging Module and smartphone are securely locked in place.
Summary
The SP Connect Moto Stem Mount is fully compatible with the SP Connect Charging Module. Once the Moto Stem Mount has been installed, simply place the Charging Module onto the mounting head and rotate it by 90° to lock it in place. Your smartphone can then be attached as usual and charged wirelessly while riding.