Is the Moto Stem Mount compatible with the Anti Vibration Module and Charging Anti Vibration Module?Updated 2 months ago
Yes. The SP Connect Moto Stem Mount is fully compatible with the SP Connect Anti Vibration Module as well as the SP Connect Charging Anti Vibration Module.
Please note: The Anti Vibration Module and Charging Anti Vibration Module are not included with the Moto Stem Mount and must be purchased separately.
We recommend fully installing the Moto Stem Mount on your motorcycle before attaching the Anti Vibration Module or Charging Anti Vibration Module.
Step-by-step instructions
1. Remove the existing mounting head
- Loosen the Allen screw on the mounting head using the supplied Allen key.
- Completely remove the existing mounting head from the mount.
- Important: Do not remove the sprocket adapter underneath, as it is required to install the Anti Vibration Module or Charging Anti Vibration Module.
2. Install the Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the sprocket adapter.
- Secure the module using the supplied M5 × 16 mm screw.
- Tighten the screw to a torque of 5 Nm.
Check the installation
- Make sure all components are securely installed.
- Before every ride, check that no components can move or come loose.
Summary
The SP Connect Moto Stem Mount is fully compatible with both the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module. After installing the Moto Stem Mount, remove the existing mounting head and attach the desired module directly to the integrated sprocket adapter. Secure the module with the supplied M5 × 16 mm screw and tighten it to 5 Nm.