Is the Moto Mount Pro compatible with the Anti Vibration Module and Charging Anti Vibration Module?Updated 2 months ago
Yes, the SP Connect Moto Mount Pro is fully compatible with the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module.
Please note: The Anti Vibration Module and Charging Anti Vibration Module are not included with the Moto Mount Pro and must be purchased separately.
We recommend fully installing the Moto Mount Pro on your motorcycle first and then attaching the Anti Vibration Module or Charging Anti Vibration Module.
Option 1: Installation on the Moto Mount Pro with arm
If you use the Moto Mount Pro with the standard arm, install the Anti Vibration Module or Charging Anti Vibration Module as follows:
1. Remove the existing head
- Loosen the Allen screw on the mounting head using the included Allen key.
- Completely remove the existing head from the mount.
- Important: Do not remove the sprocket adapter underneath, as it is required to install the Anti Vibration Module or Charging Anti Vibration Module.
2. Install the Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the sprocket adapter.
- Secure the module using the included M5 × 16 mm screw.
- Tighten the screw to a torque of 5 Nm.
Option 2: Installation directly on the clamp (without arm)
If you want to use the Moto Mount Pro without the arm, you will additionally need the SP Connect Sprocket Adapter.
1. Install the Moto Mount Pro
- First, fully install the Moto Mount Pro on your motorcycle.
2. Remove the arm
- Loosen the screw connecting the arm to the mounting clamp.
- Then completely remove the arm, the screw and the height adapter underneath.
3. Install the Sprocket Adapter
- Place the SP Connect Sprocket Adapter onto the now exposed sprocket ring.
4. Install the Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the sprocket mount of the Sprocket Adapter.
- Secure the module using the included M5 × 20 mm screw.
- Tighten the screw to a torque of 3 Nm.
Check the fit
- Make sure that all components are securely installed.
- Before every ride, check that none of the components can move or come loose.
Summary
The SP Connect Moto Mount Pro is compatible with both the Anti Vibration Module and the Charging Anti Vibration Module. When using the standard arm, the module is installed directly onto the existing sprocket adapter. If you want to use the Moto Mount Pro without the arm, the SP Connect Sprocket Adapter is additionally required to install the Anti Vibration Module or Charging Anti Vibration Module directly onto the mounting clamp.