Is the Moto Mount LT compatible with the Anti Vibration Module and Charging Anti Vibration Module?Updated 2 months ago
Yes. The SP Connect Moto Mount LT is fully compatible with the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module.
Please note: The Anti Vibration Module and Charging Anti Vibration Module are not included with the Moto Mount LT and must be purchased separately.
We recommend installing the Moto Mount LT completely on your motorcycle first and then attaching the Anti Vibration Module or Charging Anti Vibration Module.
Installation on the Moto Mount LT
The Anti Vibration Module or Charging Anti Vibration Module is installed on the standard arm of the Moto Mount LT as follows:
1. Remove the existing mounting head
- Loosen the Allen screw on the mounting head using the supplied Allen key.
- Remove the existing mounting head completely from the mount.
2. Install the Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the sprocket mount.
- Secure the module using the supplied M5 × 16 mm screw.
- Tighten the screw to a torque of 5 Nm.
Check the fit
- Make sure that all components are securely installed.
- Before every ride, check that none of the components can move or come loose.
Summary
The SP Connect Moto Mount LT is compatible with both the Anti Vibration Module and the Charging Anti Vibration Module. Both modules are installed directly on the standard arm of the Moto Mount LT and provide additional protection for sensitive smartphone cameras against high-frequency engine vibrations.