Is the Moto Mount 3D 1½″ compatible with the Charging Module?Updated 2 months ago
Yes. The SP Connect Moto Mount 3D 1½″ is fully compatible with the SP Connect Charging Module.
Please note: The Charging Module is not included with the Moto Mount 3D 1½″ and must be purchased separately.
We recommend fully installing the Moto Mount 3D 1½″ on your motorcycle first and then attaching the Charging Module.
Step-by-step instructions
1. Install the Moto Mount 3D 1½″
- Install the Moto Mount 3D 1½″ on your motorcycle handlebar.
- Make sure that the mount is firmly and securely installed.
2. Attach the Charging Module
- Place the lower mounting mechanism of the Charging Module flat and fully onto the mount head of the Moto Mount 3D 1½″.
- Rotate the Charging Module by 90° until it clicks securely into the locked position.
3. Attach your smartphone
- Place the mounting mechanism of your SP Connect Phone Case flat onto the Charging Module.
- Rotate the Phone Case by 90° until it is securely locked in place.
4. Connect the power supply
- Connect the Charging Module to a suitable power source.
Check the installation
- Make sure that all components are securely installed.
- Before use, check that the Charging Module and smartphone are securely locked in place.
Summary
The SP Connect Moto Mount 3D 1½″ is fully compatible with the SP Connect Charging Module. Once the Moto Mount 3D 1½″ has been installed, simply place the Charging Module onto the mount head and rotate it by 90° to lock it in place. You can then attach your smartphone as usual and charge it wirelessly while riding.