Is the Mirror Mount Pro compatible with the Rotation Module?Updated 2 months ago
Yes. The SP Connect Mirror Mount Pro is fully compatible with the SP Connect Rotation Module.
Please note: The Rotation Module is not included with the Mirror Mount Pro and must be purchased separately.
We recommend fully installing the Mirror Mount Pro on your motorcycle's mirror stem before installing the Rotation Module.
Step-by-step instructions
1. Remove the mounting head
- Use the included Allen key to loosen the Allen screw securing the mounting head to the Mirror Mount Pro.
- Completely remove the existing mounting head from the mount.
2. Install the Rotation Module
- Install the Rotation Module together with the mounting head of the Mirror Mount Pro.
- Follow the instructions included with the Rotation Module (illustration V2).
3. Secure the components
- Tighten all screws to a torque of 3 Nm.
Check the fit
- Make sure all components are securely installed.
- Before use, check that no components can move or come loose.
Summary
The SP Connect Mirror Mount Pro is fully compatible with the SP Connect Rotation Module. After removing the mounting head, install the Rotation Module between the mount and the mounting head as shown in illustration V2 of the manual, then securely tighten the screws to a torque of 3 Nm.