Is the Mirror Mount compatible with the Rotation Module?Updated 2 months ago
Yes. The SP Connect Mirror Mount is fully compatible with the SP Connect Rotation Module.
Please note: The Rotation Module is not included with the Mirror Mount and must be purchased separately.
The SP Connect Sprocket Adapter is also required for installation. It is already included with the Rotation Module.
We recommend fully installing the Mirror Mount on the mirror stem of your motorcycle before installing the Rotation Module.
Step-by-step instructions
1. Install the Mirror Mount
- Fully install the Mirror Mount on the mirror stem of your motorcycle.
2. Remove the mount head
- Loosen the Allen screw on the mount head.
- Remove the existing mount head completely.
3. Install the Sprocket Adapter
- Place the SP Connect Sprocket Adapter included with the Rotation Module onto the sprocket mount of the Mirror Mount.
4. Install the Rotation Module
- Insert the Rotation Module into the Sprocket Adapter.
- Then install the mount head onto the Rotation Module.
- Follow the instructions included with the Rotation Module (illustration V2).
- Tighten all screws to a torque of 1.2 Nm.
Check the fit
- Make sure all components are securely installed.
- Before use, check that none of the components can move or come loose.
Summary
The SP Connect Mirror Mount is fully compatible with the SP Connect Rotation Module. Installation requires the SP Connect Sprocket Adapter, which is included with the Rotation Module. The Rotation Module is then installed according to illustration V2 in the manual and securely tightened to a torque of 1.2 Nm.