Is the Mirror Mount compatible with the Anti Vibration Module and Charging Anti Vibration Module?Updated 2 months ago
Yes. The SP Connect Mirror Mount is fully compatible with the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module.
Please note: The SP Connect Sprocket Adapter is required for installation. It is already included with both the Anti Vibration Module and Charging Anti Vibration Module.
We recommend fully installing the Mirror Mount on the mirror tube of your motorcycle before installing the Anti Vibration Module or Charging Anti Vibration Module.
Step-by-step instructions
1. Install the Mirror Mount
- Fully install the Mirror Mount on the mirror tube of your motorcycle.
2. Remove the mounting head
- Loosen the Allen screw on the mounting head.
- Remove the existing mounting head completely.
3. Install the Sprocket Adapter
- Place the SP Connect Sprocket Adapter included with the Anti Vibration Module or Charging Anti Vibration Module onto the sprocket mount of the Mirror Mount.
4. Install the Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the Sprocket Adapter.
- Secure the module using the included M5 × 16 mm screw.
- Tighten the screw to a torque of 1.2 Nm.
Check the fit
- Make sure all components are securely installed.
- Before every ride, check that no components can move or come loose.
Summary
The SP Connect Mirror Mount is compatible with both the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module. The SP Connect Sprocket Adapter included with the modules is required for installation. The module is then securely attached to the Mirror Mount using the included M5 × 16 mm screw and tightened to a torque of 1.2 Nm.