Is the Micro Bike Mount compatible with the Anti Vibration Module or Charging Anti Vibration Module?Updated 2 months ago
Yes. You can use the SP-Connect Micro Bike Mount with the SP-Connect Anti Vibration Module as well as the SP-Connect Charging Anti Vibration Module.
For this, you will additionally need the following item:
- Sprocket Adapter
- This adapter is included with the Anti Vibration Module and Charging Anti Vibration Module.
Please note: The Anti Vibration Module and the Charging Anti Vibration Module are not included with the Micro Bike Mount and must be purchased separately.
Step-by-step instructions
1. Remove the mount head
- Loosen the screw securing the mount head using the included Allen key
- Remove the head completely from the mount
- The circular toothed interface on the top of the mount will now be visible
2. Insert the Sprocket Adapter
- Place the Sprocket Adapter onto the toothed interface
3. Install the module
- Mount the Anti Vibration Module or Charging Anti Vibration Module onto the Sprocket Adapter
- Secure it using the included M5 x 20 mm screw
- Tighten the screw with a torque of 2.5 Nm
Check installation
- Ensure that all components are firmly mounted
- Check before use that nothing is loose