Is the Handlebar Mount Pro MTB compatible with the Anti Vibration Module or the Charging Anti Vibration Module?Updated 8 hours ago
Yes, the SP-Connect Handlebar Mount Pro MTB is fully compatible with the SP-Connect Anti Vibration Module and the SP-Connect Charging Anti Vibration Module.
Step-by-step instructions
1. Remove the existing head
- Loosen the Allen screw on the mounting head using the included Allen key
- Remove the existing head completely from the mount
- Important: Do not remove the gear adapter underneath, as it is required to mount the Anti Vibration Module or Charging Anti Vibration Module
2. Install the Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the gear adapter
- Secure the module using the included M5 x 16 mm screw
- Tighten the screw to a torque of 3 Nm
Check fit
- Make sure all components are securely mounted
- Before use, check that nothing moves
Result
Your Handlebar Mount Pro MTB is now compatible with the Anti Vibration Module or Charging Anti Vibration Module and ready to use.