Is the Handlebar Mount Pro compatible with the Anti Vibration Module or the Charging Anti Vibration Module?Updated 7 days ago
Yes. The current version of the SP Connect Handlebar Mount Pro available in our online store can be made compatible with the Anti Vibration Module and the Charging Anti Vibration Module.
For this upgrade, you will need the following additional item:
Step-by-step instructions
1. Remove the existing head
- Loosen the Allen screw on the mounting head using the included Allen key
- Remove the existing head completely from the mount
2. Insert the toothed adapter
- Insert the gear adapter included with the Mag-Align Head A into the mount
3. Install the Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the toothed adapter
- Secure the module using the included M5 x 16 mm screw
- Tighten the screw to a torque of 3 Nm
Check fit
- Make sure all components are securely mounted
- Before use, check that nothing moves
Result
Your Handlebar Mount Pro is now compatible with the Anti Vibration Module or Charging Anti Vibration Module and ready to use.
Further information
Compatibility note
Please note that there still existis an older version of the Handlebar Mount Pro which cannot be made compatible with the Anti Vibration Module and Charging Anti Vibration Module.
How to identify your version
1. Current version (compatible)
- There are 4 stamped holes at the front mounting point of the mount
- This version is compatible with the Mag-Align Head A and therefore with the Anti Vibration Module and Charging Anti Vibration Module
2. Older version (not compatible)
- There is a tooth connection underneath the mounting head
- This version is not compatible with the Anti Vibration Module or the Charging Anti Vibration Module
Important for checking
- Remove the mounting head to identify your version
- The difference is only visible when the head is removed