Is the Handlebar Mount compatible with the Universal Charging Phone Clamp?Updated 6 hours ago
Yes. The SP Connect Handlebar Mount is compatible with the Universal Charging Phone Clamp.
The Universal Charging Phone Clamp attaches directly to the Handlebar Mount using the SP Connect Twist-to-Lock mechanism. This allows you to securely mount your smartphone and charge it wirelessly while cycling, without requiring a dedicated SP Connect Phone Case.
Please note: The Universal Charging Phone Clamp is not included with the Handlebar Mount and must be purchased separately. A suitable external power supply is also required for wireless charging.
How Do I Install the Universal Charging Phone Clamp?
Follow these steps to attach the Universal Charging Phone Clamp to your Handlebar Mount:
- Install the Handlebar Mount: Attach the Handlebar Mount to a compatible section of your bicycle's handlebars and ensure that it is securely fastened.
- Open the clamping mechanism: Pull out the adjustment crown on the Universal Charging Phone Clamp to unlock the adjustment mechanism.
- Insert your smartphone: Position your smartphone centrally inside the clamp, ensuring that it is correctly aligned with the wireless charging surface.
- Adjust the clamp: Turn the adjustment crown until your smartphone is held firmly and securely between the clamping arms. Avoid applying excessive pressure.
- Lock the adjustment: Push the adjustment crown back into its original position to secure the setting.
- Attach the Universal Charging Phone Clamp: Position the mounting interface on the underside of the clamp flat against the mounting head of the Handlebar Mount. Rotate the clamp by 90° until the Twist-to-Lock mechanism is fully engaged.
- Connect the power supply: Connect the Universal Charging Phone Clamp to a suitable external power source using the appropriate charging cable.
- Check the installation: Verify that the clamp and smartphone are securely attached and that wireless charging has started.
What Do I Need for Wireless Charging?
To use the Universal Charging Phone Clamp with your Handlebar Mount, you will need:
- Handlebar Mount: Provides the mounting platform on your bicycle.
- Universal Charging Phone Clamp: Holds your smartphone securely and provides integrated wireless charging.
- Compatible smartphone: Your device must fit within the supported dimensions of the clamp and support Qi wireless charging.
- Suitable external power supply: A compatible power bank or bicycle power supply is required to operate the wireless charging function.
Important: Unlike the Charging Module, the Universal Charging Phone Clamp does not require a dedicated SP Connect Phone Case. Your smartphone is secured directly by the adjustable clamping mechanism.
Important Installation and Safety Information
Before every ride, please check the following:
- Handlebar Mount: Ensure that the mount is securely attached to your bicycle's handlebars.
- Twist-to-Lock connection: Verify that the Universal Charging Phone Clamp is correctly locked onto the Handlebar Mount.
- Smartphone: Check that your device is firmly secured between the clamping arms and that the adjustment crown is locked.
- Charging connection: Ensure that the charging cable is securely connected and routed safely without interfering with steering, braking, or other bicycle components.
- Wireless charging: Verify that your smartphone is correctly positioned and charging before starting your ride.
Please note: Wireless charging performance depends on your smartphone model, charging coil alignment, power supply, temperature, and other operating conditions. Some smartphone cases may also interfere with wireless charging.
Further Information
For detailed installation instructions and illustrations, please refer to the official product manuals:
Summary
The SP Connect Handlebar Mount is compatible with the Universal Charging Phone Clamp.
Simply secure your smartphone inside the clamp, lock the adjustment crown, and attach the clamp to the Handlebar Mount using the 90° Twist-to-Lock mechanism.
Once connected to a suitable external power supply, the Universal Charging Phone Clamp allows you to securely mount and wirelessly charge your compatible smartphone while cycling, without requiring a dedicated SP Connect Phone Case.