Is the Handlebar Mount compatible with the Rotation Module?Updated 2 months ago
Yes. The current version of the SP Connect Handlebar Mount can be made compatible with the SP Connect Rotation Module .
For this, you will additionally need the following item:
Please note: The Rotation Module as well as the Head SPC+ Moto Pro MTB are not included with the Handlebar Mount and must be purchased separately.
Step-by-step instructions
1. Remove the existing head
- Loosen the top Allen screw using the included Allen key
- Remove the existing head completely from the mount
2. Install the Rotation Module
- Mount the Rotation Module together with the Head SPC+ Moto Pro MTB
- Follow the instructions included with the product (see illustration V2)
3. Secure all components
- Tighten all screws to a torque of 3 Nm
Check installation
- Ensure that all components are firmly mounted
- Check before use that nothing is loose
Result
You can now adjust the orientation of your smartphone on the Handlebar Mount quickly, flexibly, and without tools at any time.
Further information
Compatibility note
Please note that there is an older version of the Handlebar Mount which is not compatible with the Rotation Module.
How to identify your version
1. Current version (compatible)
- The screw used to remove the mount head is located on the top side of the mount
2. Older version (not compatible)
- The screw is located on the underside of the mount
- This version is not compatible with the Rotation Module