Is the GPS Cradle Mount compatible with the Rotation Module?Updated 2 months ago
Yes. The SP Connect GPS Cradle Mount is fully compatible with the SP Connect Rotation Module.
Please note: The Rotation Module is not included with the GPS Cradle Mount and must be purchased separately.
We recommend fully installing the GPS Cradle Mount on your motorcycle first and then installing the Rotation Module.
Step-by-step instructions
1. Remove the mounting head
- Loosen the Allen screw securing the mounting head to the GPS Cradle Mount using the included Allen key.
- Completely remove the existing mounting head from the mount.
2. Install the Rotation Module
- Install the Rotation Module together with the mounting head of the GPS Cradle Mount.
- Follow the instructions included with the Rotation Module (illustration V2).
3. Secure the components
- Tighten all screws to a torque of 3 Nm.
Check the installation
- Make sure that all components are securely installed.
- Before use, check that no components can move or come loose.
Summary
The SP Connect GPS Cradle Mount is fully compatible with the SP Connect Rotation Module. After removing the mounting head, install the Rotation Module between the mount and the mounting head according to illustration V2 in the manual and securely tighten the screws to a torque of 3 Nm.