Is the GPS Cradle Mount compatible with the Anti Vibration Module and Charging Anti Vibration Module?Updated 2 months ago
Yes. The SP Connect GPS Cradle Mount is fully compatible with the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module.
Please note: The Anti Vibration Module and Charging Anti Vibration Module are not included with the GPS Cradle Mount and must be purchased separately.
We recommend fully installing the GPS Cradle Mount on your motorcycle first and then attaching the Anti Vibration Module or Charging Anti Vibration Module.
Step-by-step instructions
1. Remove the existing mounting head
- Loosen the Allen screw on the mounting head using the supplied Allen key.
- Remove the existing mounting head completely from the mount.
- Important: Do not remove the sprocket adapter underneath, as it is required to install the Anti Vibration Module or Charging Anti Vibration Module.
2. Install the Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the sprocket adapter.
- Secure the module using the supplied M5 × 16 mm screw.
- Tighten the screw to a torque of 5 Nm.
Check the installation
- Make sure that all components are securely installed.
- Before every ride, check that no components can move or come loose.
Summary
The SP Connect GPS Cradle Mount is fully compatible with the SP Connect Anti Vibration Module and SP Connect Charging Anti Vibration Module. Once the GPS Cradle Mount has been installed, the existing mounting head is removed and the desired module is attached directly to the integrated sprocket adapter with a torque of 5 Nm.