Is the Crossbar Mount Pro compatible with the Rotation Module?Updated 2 months ago
Yes. The SP Connect Crossbar Mount Pro is fully compatible with the SP Connect Rotation Module.
Please note: The Rotation Module is not included with the Crossbar Mount Pro and must be purchased separately.
We recommend fully installing the Crossbar Mount Pro on the handlebar or cockpit crossbar of your motorcycle before installing the Rotation Module.
Step-by-step instructions
1. Remove the mounting head
- Use the included Allen key to loosen the Allen screw securing the mounting head to the Crossbar Mount Pro.
- Completely remove the existing mounting head from the mount.
2. Install the Rotation Module
- Install the Rotation Module together with the mounting head of the Crossbar Mount Pro.
- Follow the instructions included with the Rotation Module (illustration V2).
3. Secure the components
- Tighten all screws to a torque of 3 Nm.
Check the fit
- Make sure that all components are securely installed.
- Before use, check that none of the components can move or come loose.
Summary
The SP Connect Crossbar Mount Pro is fully compatible with the SP Connect Rotation Module. After removing the mounting head, the Rotation Module is installed between the mount and the mounting head according to illustration V2 in the manual and then securely fastened with a torque of 3 Nm.