Is the Crossbar Mount Pro compatible with the Charging Module?Updated 2 months ago
Yes. The SP Connect Crossbar Mount Pro is fully compatible with the SP Connect Charging Module.
Please note: The Charging Module is not included with the Crossbar Mount Pro and must be purchased separately.
We recommend fully installing the Crossbar Mount Pro on the handlebar or cockpit crossbar of your motorcycle before attaching the Charging Module.
Step-by-step instructions
1. Install the Crossbar Mount Pro
- Install the Crossbar Mount Pro on the handlebar or cockpit crossbar of your motorcycle.
- Make sure the mount is firmly and securely installed.
2. Install the Charging Module
- Place the lower mounting mechanism of the Charging Module flat and fully onto the mounting head of the Crossbar Mount Pro.
- Rotate the Charging Module by 90° until it clicks into the locked position.
3. Attach your smartphone
- Place the mounting mechanism of your SP Connect Phone Case flat onto the Charging Module.
- Rotate the Phone Case by 90° until it is securely locked in place.
4. Connect the power supply
- Connect the Charging Module to a suitable power source.
Check the fit
- Make sure that all components are securely installed.
- Before use, check that the Charging Module and your smartphone are securely locked in place.
Summary
The SP Connect Crossbar Mount Pro is fully compatible with the SP Connect Charging Module. Once the Crossbar Mount Pro has been installed, simply place the Charging Module onto the mounting head and rotate it by 90° to lock it in place. You can then attach your smartphone as usual and charge it wirelessly while riding.