Is the Clutch Mount Pro compatible with the Rotation Module?Updated 2 months ago
Yes. The SP Connect Clutch Mount Pro is fully compatible with the SP Connect Rotation Module.
Please note: The Rotation Module is not included with the Clutch Mount Pro and must be purchased separately.
We recommend fully installing the Clutch Mount Pro on your motorcycle first and then installing the Rotation Module.
Step-by-step instructions
1. Remove the existing mounting head
- Loosen the Allen screw securing the mounting head to the Clutch Mount Pro.
- Completely remove the existing mounting head from the mount.
2. Install the Rotation Module
- Install the Rotation Module together with the mounting head of the Clutch Mount Pro.
- Follow the Rotation Module installation instructions (illustration V2).
3. Secure the components
- Tighten all screws to a torque of 3 Nm.
Check the fit
- Make sure all components are securely installed.
- Before every ride, check that no components can move or come loose.
Summary
The SP Connect Clutch Mount Pro is fully compatible with the SP Connect Rotation Module. The Rotation Module is installed between the mount and the mounting head and then securely fastened with a torque of 3 Nm.