Is the Clutch Mount Pro compatible with the Anti Vibration Module and the Charging Anti Vibration Module?Updated 2 months ago
Yes. The SP Connect Clutch Mount Pro is fully compatible with both the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module.
Please note: The Anti Vibration Module and Charging Anti Vibration Module are not included with the Clutch Mount Pro and must be purchased separately.
We recommend fully installing the Clutch Mount Pro on your motorcycle first and then attaching the Anti Vibration Module or Charging Anti Vibration Module.
Step-by-step instructions
1. Remove the existing mounting head
- Loosen the Allen screw on the mounting head using the supplied Allen key.
- Completely remove the existing mounting head from the mount.
- Important: Do not remove the toothed adapter underneath, as it is required to install the Anti Vibration Module or Charging Anti Vibration Module.
2. Install the Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the toothed adapter.
- Secure the module using the supplied M5 × 16 mm screw.
- Tighten the screw to a torque of 5 Nm.
Check the fit
- Make sure all components are securely installed.
- Before every ride, check that no components can move or come loose.
Summary
The SP Connect Clutch Mount Pro is compatible with both the Anti Vibration Module and the Charging Anti Vibration Module. The module is installed directly onto the existing toothed adapter of the Clutch Mount Pro. Once the mounting screw has been tightened to 5 Nm, the module is ready for use.