Is the Brake Mount Large compatible with the Rotation Module?Updated 2 months ago
Yes. The SP Connect Brake Mount Large is fully compatible with the SP Connect Rotation Module.
Please note: The Rotation Module is not included with the Brake Mount Large and must be purchased separately.
The SP Connect Sprocket Adapter is also required for installation. It is already included with the Rotation Module.
We recommend fully installing the Brake Mount Large on the brake fluid reservoir of your motorcycle before installing the Rotation Module.
Step-by-step instructions
1. Install the Brake Mount Large
- Fully install the Brake Mount Large on the brake fluid reservoir of your motorcycle.
2. Remove the mounting head
- Loosen the Allen screw on the mounting head.
- Completely remove the existing mounting head.
3. Install the Sprocket Adapter
- Place the SP Connect Sprocket Adapter included with the Rotation Module onto the sprocket interface of the Brake Mount Large.
4. Install the Rotation Module
- Insert the Rotation Module into the Sprocket Adapter.
- Then install the mounting head onto the Rotation Module.
- Follow the instructions included with the Rotation Module (illustration V2).
- Tighten all screws to a torque of 1.2 Nm.
Check the fit
- Make sure all components are securely installed.
- Before use, check that none of the components can move or come loose.
Summary
The SP Connect Brake Mount Large is fully compatible with the SP Connect Rotation Module. Installation requires the SP Connect Sprocket Adapter, which is included with the Rotation Module. The Rotation Module is then installed according to illustration V2 in the manual and securely fastened with a torque of 1.2 Nm.