Is the Brake Mount Large compatible with the Anti Vibration Module and Charging Anti Vibration Module?Updated 2 months ago
Yes. The SP Connect Brake Mount Large is fully compatible with the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module.
Please note: The SP Connect Sprocket Adapter is required for installation. It is already included with both the Anti Vibration Module and the Charging Anti Vibration Module.
We recommend fully installing the Brake Mount Large on the brake fluid reservoir of your motorcycle before attaching the Anti Vibration Module or Charging Anti Vibration Module.
Step-by-step instructions
1. Install the Brake Mount Large
- Fully install the Brake Mount Large on the brake fluid reservoir of your motorcycle.
2. Remove the mounting head
- Loosen the Allen screw on the mounting head.
- Remove the existing mounting head completely.
3. Install the Sprocket Adapter
- Place the SP Connect Sprocket Adapter included with the Anti Vibration Module or Charging Anti Vibration Module onto the sprocket mount of the Brake Mount Large.
4. Install the Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the Sprocket Adapter.
- Secure the module using the included M5 × 20 mm screw.
- Tighten the screw to a torque of 1.2 Nm.
Check the fit
- Make sure all components are securely installed.
- Before every ride, check that none of the components can move or come loose.
Summary
The SP Connect Brake Mount Large is compatible with both the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module. Installation requires the SP Connect Sprocket Adapter, which is already included with both modules. The module is then securely attached to the Brake Mount Large using the included M5 × 20 mm screw, tightened to a torque of 1.2 Nm.