Is the Brake Mount compatible with the Rotation Module?Updated 2 months ago
Yes. The SP Connect Brake Mount is fully compatible with the SP Connect Rotation Module.
Please note: The Rotation Module is not included with the Brake Mount and must be purchased separately.
The SP Connect Sprocket Adapter is also required for installation. It is already included with the Rotation Module.
We recommend installing the Brake Mount completely on your motorcycle's brake fluid reservoir first, and then installing the Rotation Module.
Step-by-step instructions
1. Install the Brake Mount
- Install the Brake Mount completely on your motorcycle's brake fluid reservoir.
2. Remove the mounting head
- Loosen the Allen screw on the mounting head.
- Remove the existing mounting head completely.
3. Install the Sprocket Adapter
- Place the SP Connect Sprocket Adapter included with the Rotation Module onto the sprocket interface of the Brake Mount.
4. Install the Rotation Module
- Place the Rotation Module into the Sprocket Adapter.
- Then install the mounting head onto the Rotation Module.
- Follow the instructions supplied with the Rotation Module (illustration V2).
- Tighten all screws to a torque of 1.2 Nm.
Check the installation
- Make sure all components are securely installed.
- Before riding, check that none of the components can move or come loose.
Summary
The SP Connect Brake Mount is fully compatible with the SP Connect Rotation Module. Installation requires the SP Connect Sprocket Adapter, which is already included with the Rotation Module. The Rotation Module is then installed according to illustration V2 in the instructions and securely fastened with a torque of 1.2 Nm.