Is the Brake Mount compatible with the Charging Module?Updated 2 months ago
Yes. The SP Connect Brake Mount is fully compatible with the SP Connect Charging Module.
Please note: The Charging Module is not included with the Brake Mount and must be purchased separately.
We recommend installing the Brake Mount completely on your motorcycle's brake fluid reservoir first, and then attaching the Charging Module.
Step-by-step instructions
1. Install the Brake Mount
- Install the Brake Mount on your motorcycle's brake fluid reservoir.
- Make sure the mount is firmly and securely installed.
2. Attach the Charging Module
- Place the bottom mechanism of the Charging Module flat and fully onto the mounting head of the Brake Mount.
- Rotate the Charging Module by 90° until it clicks securely into the locked position.
3. Attach your smartphone
- Place the mounting mechanism of your SP Connect Phone Case flat onto the Charging Module.
- Rotate the Phone Case by 90° until it is securely locked in place.
4. Connect the power supply
- Connect the Charging Module to a suitable power source.
Check the installation
- Make sure all components are securely installed.
- Before riding, check that the Charging Module and smartphone are securely locked in place.
Summary
The SP Connect Brake Mount is fully compatible with the SP Connect Charging Module. Once the Brake Mount has been installed, simply place the Charging Module onto the mounting head and rotate it by 90° to lock it in place. You can then attach your smartphone as usual and charge it wirelessly while riding.