Is the Brake Mount compatible with the Anti Vibration Module and Charging Anti Vibration Module?Updated 2 months ago
Yes. The SP Connect Brake Mount is fully compatible with both the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module.
Please note: The SP Connect Sprocket Adapter is required for installation. It is already included with both the Anti Vibration Module and Charging Anti Vibration Module.
We recommend installing the Brake Mount completely on your motorcycle's brake fluid reservoir first, and then installing the Anti Vibration Module or Charging Anti Vibration Module.
Step-by-step instructions
1. Install the Brake Mount
- Install the Brake Mount completely on your motorcycle's brake fluid reservoir.
2. Remove the mounting head
- Loosen the Allen screw on the mounting head.
- Remove the existing mounting head completely.
3. Install the Sprocket Adapter
- Place the Sprocket Adapter included with the Anti Vibration Module or Charging Anti Vibration Module onto the sprocket interface of the Brake Mount.
4. Install the Anti Vibration Module
- Place the Anti Vibration Module or Charging Anti Vibration Module into the Sprocket Adapter.
- Secure the module using the supplied M5 × 20 mm screw.
- Tighten the screw to a torque of 1.2 Nm.
Check the installation
- Make sure all components are securely installed.
- Before every ride, check that none of the components can move or come loose.
Summary
The SP Connect Brake Mount is compatible with both the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module. Installation requires the SP Connect Sprocket Adapter, which is already included with both modules. The module is then securely attached to the Brake Mount using the supplied M5 × 20 mm screw, tightened to a torque of 1.2 Nm.