Is the Bar Clamp Mount Pro compatible with the Rotation Module?Updated 2 months ago
Yes. The SP Connect Bar Clamp Mount Pro is fully compatible with the SP Connect Rotation Module.
Please note: The Rotation Module is not included with the Bar Clamp Mount Pro and must be purchased separately.
We recommend fully installing the Bar Clamp Mount Pro on your motorcycle first and then installing the Rotation Module.
Step-by-step instructions
1. Remove the mounting head
- Loosen the Allen screw securing the mounting head to the Bar Clamp Mount Pro using the included Allen key.
- Remove the existing mounting head completely from the mount.
2. Install the Rotation Module
- Install the Rotation Module together with the mounting head of the Bar Clamp Mount Pro.
- Follow the instructions supplied with the Rotation Module (illustration V2).
3. Secure the components
- Tighten all screws to a torque of 3 Nm.
Check the fit
- Make sure all components are securely installed.
- Before use, check that no components can move or come loose.
Summary
The SP Connect Bar Clamp Mount Pro is fully compatible with the SP Connect Rotation Module. After removing the mounting head, install the Rotation Module between the mount and the mounting head according to illustration V2 in the instructions, then securely tighten it to a torque of 3 Nm.