Is the Bar Clamp Mount Pro compatible with the Anti Vibration Module and Charging Anti Vibration Module?Updated 2 months ago
Yes. The SP Connect Bar Clamp Mount Pro is fully compatible with both the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module.
Please note: The Anti Vibration Module and Charging Anti Vibration Module are not included with the Bar Clamp Mount Pro and must be purchased separately.
We recommend fully installing the Bar Clamp Mount Pro on your motorcycle first and then attaching the Anti Vibration Module or Charging Anti Vibration Module.
Step-by-step instructions
1. Remove the existing head
- Loosen the Allen screw on the mounting head using the included Allen key.
- Remove the existing head completely from the mount.
- Important: Do not remove the sprocket adapter underneath, as it is required to install the Anti Vibration Module or Charging Anti Vibration Module.
2. Install the Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the sprocket adapter.
- Secure the module using the supplied M5 × 16 mm screw.
- Tighten the screw to a torque of 5 Nm.
Check the fit
- Make sure all components are securely installed.
- Before every ride, check that no components can move or come loose.
Summary
The SP Connect Bar Clamp Mount Pro is fully compatible with both the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module. Once the Bar Clamp Mount Pro has been installed, remove the existing mounting head and attach the desired module directly to the integrated sprocket adapter, tightening it to 5 Nm.