Is the Ballhead Mount Pro compatible with the Rotation Module?Updated 2 months ago
Yes. The SP Connect Ballhead Mount Pro is fully compatible with the SP Connect Rotation Module.
Please note: The Rotation Module is not included with the Ballhead Mount Pro and must be purchased separately.
The SP Connect Sprocket Adapter is also required for installation. It is already included with the Rotation Module.
We recommend fully installing the Ballhead Mount Pro on your RAM® mount first and then installing the Rotation Module.
Step-by-step instructions
1. Install the Ballhead Mount Pro
- Fully install the Ballhead Mount Pro on your RAM® mount.
2. Remove the mounting head
- Loosen the Allen screw on the mounting head.
- Completely remove the existing mounting head.
3. Install the Sprocket Adapter
- Place the SP Connect Sprocket Adapter included with the Rotation Module onto the sprocket mount of the Ballhead Mount Pro.
4. Install the Rotation Module
- Insert the Rotation Module into the Sprocket Adapter.
- Then install the mounting head onto the Rotation Module.
- Follow the instructions included with the Rotation Module (illustration V2).
- Tighten all screws to a torque of 1.2 Nm.
Check the installation
- Make sure that all components are securely installed.
- Before use, check that none of the components can move.
Summary
The SP Connect Ballhead Mount Pro is fully compatible with the SP Connect Rotation Module. Installation requires the SP Connect Sprocket Adapter, which is already included with the Rotation Module. The Rotation Module is then installed according to illustration V2 in the instructions and securely fastened with a torque of 1.2 Nm.