Is the Ballhead Mount Pro compatible with the Charging Module?Updated 2 months ago
Yes. The SP Connect Ballhead Mount Pro is fully compatible with the SP Connect Charging Module.
Please note: The Charging Module is not included with the Ballhead Mount Pro and must be purchased separately.
We recommend fully installing the Ballhead Mount Pro on your RAM® mount first and then attaching the Charging Module.
Step-by-step instructions
1. Install the Ballhead Mount Pro
- Install the Ballhead Mount Pro on your RAM® mount.
- Make sure that the mount is firmly and securely installed.
2. Install the Charging Module
- Place the lower mechanism of the Charging Module flat (fully) onto the mounting head of the Ballhead Mount Pro.
- Rotate the Charging Module by 90° until it clicks into the locked position.
3. Attach your smartphone
- Place the mechanism of your SP Connect Phone Case flat onto the Charging Module.
- Rotate the Phone Case by 90° until it is securely locked.
4. Connect the power supply
- Connect the Charging Module to a suitable power source.
Check the installation
- Make sure that all components are securely installed.
- Before use, check that the Charging Module and smartphone are securely locked in place.
Summary
The SP Connect Ballhead Mount Pro is fully compatible with the SP Connect Charging Module. Once the Ballhead Mount Pro has been installed, simply place the Charging Module onto the mounting head and rotate it by 90° to lock it in place. You can then attach your smartphone as usual and charge it wirelessly while riding.