Is the Ballhead Mount Pro compatible with the Anti Vibration Module and Charging Anti Vibration Module?Updated 2 months ago
Yes. The SP Connect Ballhead Mount Pro is fully compatible with both the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module.
Please note: The SP Connect Sprocket Adapter is required for installation. The Sprocket Adapter is already included with both the Anti Vibration Module and Charging Anti Vibration Module.
We recommend fully installing the Ballhead Mount Pro on your RAM® mount first and then installing the Anti Vibration Module or Charging Anti Vibration Module.
Step-by-step instructions
1. Install the Ballhead Mount Pro
- Fully install the Ballhead Mount Pro on your RAM® mount.
2. Remove the mounting head
- Loosen the Allen screw on the mounting head.
- Completely remove the existing mounting head.
3. Install the Sprocket Adapter
- Place the SP Connect Sprocket Adapter included with the Anti Vibration Module or Charging Anti Vibration Module onto the sprocket mount of the Ballhead Mount Pro.
4. Install the Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the Sprocket Adapter.
- Secure the module using the supplied M5 × 20 mm screw.
- Tighten the screw to a torque of 1.2 Nm.
Check the installation
- Make sure that all components are securely installed.
- Before every ride, check that none of the components can move or come loose.
Summary
The SP Connect Ballhead Mount Pro is compatible with both the SP Connect Anti Vibration Module and the SP Connect Charging Anti Vibration Module. Installation requires the SP Connect Sprocket Adapter, which is already included with both modules. The module is then securely attached to the Ballhead Mount Pro using the supplied M5 × 20 mm screw and tightened to a torque of 1.2 Nm.