Is the Anti Vibration Module compatible with the Wireless Powerbank?Updated 2 months ago
Yes. The SP Connect Anti Vibration Module is fully compatible with the SP Connect Wireless Powerbank 5000 mAh as well as the SP Connect Wireless Powerbank 10,000 mAh.
Please note: The Wireless Powerbank 5000 mAh and Wireless Powerbank 10,000 mAh are not included with the Anti Vibration Module and must be purchased separately.
We recommend first fully installing the Anti Vibration Module together with the SP Connect mount on your motorcycle and only then attaching the Wireless Powerbank.
Step-by-step instructions
1. Install the Anti Vibration Module
- Install the Anti Vibration Module together with the SP Connect mount on your motorcycle handlebar.
- Make sure that the mount and Anti Vibration Module are firmly and securely installed.
2. Attach the Wireless Powerbank
- Place the mechanism of the Wireless Powerbank completely flat onto the mount of the Anti Vibration Module.
- Rotate the Wireless Powerbank by 90° until it clicks into the locked position.
3. Attach your smartphone
- Place the mechanism of your SP Connect Phone Case completely flat onto the mount of the Wireless Powerbank.
- Rotate the Phone Case by 90° until it is securely locked in place.
Check the installation
- Make sure that all components are firmly and securely installed.
- Before use, check that the Wireless Powerbank and your smartphone are securely locked in place.
Summary
The SP Connect Anti Vibration Module is fully compatible with both the SP Connect Wireless Powerbank 5000 mAh and the SP Connect Wireless Powerbank 10,000 mAh. Once the Anti Vibration Module has been installed together with the SP Connect mount on your motorcycle, the Wireless Powerbank is simply placed onto the Anti Vibration Module and rotated by 90° to lock it in place. Your smartphone can then be attached as usual and charged while riding either wirelessly (inductively) or via cable.