Is the Anti Vibration Module compatible with the Rotation Module?Updated 2 months ago
Yes. The SP Connect Anti Vibration Module is compatible with the SP Connect Rotation Module.
Please note: The Rotation Module is not included with the Anti Vibration Module and must be purchased separately.
Important: Since the Anti Vibration Module is used together with an SP Connect mount, the mount you are using must also be compatible with the Rotation Module. You can find a complete overview of compatible mounts here:
We recommend first fully installing the SP Connect mount on your motorcycle and only then installing the Rotation Module together with the Anti Vibration Module.
Step-by-step instructions
1. Remove the existing mounting head
- Loosen the screw securing the existing mounting head to your SP Connect mount.
- Completely remove the existing mounting head from the mount.
2. Install the Rotation Module and Anti Vibration Module
- Install the Rotation Module together with the Anti Vibration Module on the designated mounting point of your SP Connect mount.
- Follow the instructions supplied with the Rotation Module according to illustration V1.
3. Secure the components
- Tighten all screws according to the specifications in the respective installation manuals.
Check the installation
- Make sure that all components are firmly and securely installed.
- Before use, check that no components can move or come loose unintentionally.
Summary
The SP Connect Anti Vibration Module is compatible with the SP Connect Rotation Module. The SP Connect mount you are using must also be suitable for use with the Rotation Module. When installing the Rotation Module together with the Anti Vibration Module, follow illustration V1 in the Rotation Module manual.