I still have a classic SPC Mirror Mount with straight rails. How can I upgrade to the improved system with semi-circular rails?Updated 2 months ago
You can easily upgrade your SP Connect SPC Mirror Mount to the current system with semi-circular rails (SPC+) without having to replace the entire mount.
Only the mounting head (Head) needs to be replaced. The rest of the mount remains unchanged.
For the upgrade, you need the following product:
Step-by-step instructions
1. Remove the old SPC head (straight rails)
- Loosen the Allen screw on the mounting head using a suitable Allen key.
- Completely remove the existing SPC head from the Mirror Mount.
2. Install the new SPC+ head
- Insert the Head SPC+ Brake, Micro Bike, Uni Bike, Mirror into the mount of the Mirror Mount.
- Make sure the head is correctly positioned and sits flush.
3. Secure the head
- Reinsert the Allen screw.
- Tighten the screw evenly.
- Use a torque of 3 Nm to ensure safe and correct installation.
Check the installation
- Make sure the new mounting head is securely installed and does not move.
- Before use, check that the screw is correctly tightened.
- Before every ride, check that the mount is securely attached.
Summary
After replacing the mounting head, your SP Connect Mirror Mount uses the current SPC+ System with semi-circular rails and is compatible with all current SP Connect Phone Cases and SP Connect Universal solutions.