I still have a classic SPC Mirror Mount Pro with straight rails. How can I upgrade to the improved system with rounded rails?Updated 2 months ago
You can easily upgrade your SP Connect SPC Mirror Mount Pro to the current system with rounded rails (SPC+) without having to replace the entire mount.
Only the mounting head needs to be replaced; the rest of the mount remains unchanged.
You will need the following product for the upgrade:
Step-by-step instructions
1. Remove the old SPC head (straight rails)
- Loosen the Allen screw on the mounting head using the Allen key included with the Mirror Mount Pro.
- Completely remove the existing SPC head from the mount.
2. Install the new SPC+ head
- Insert the Head SPC+ Moto Pro (MTB) into the mount.
- Make sure the head is correctly positioned and sits flush.
3. Secure the head
- Reinsert the Allen screw.
- Tighten the screw evenly.
- Tighten to a torque of 3 Nm to ensure a safe and correct installation.
Check the fit
- Make sure the new head is securely installed and does not move.
- Before use, check that all screws are correctly tightened.
Summary
After replacing the head, your SP Connect Mirror Mount Pro uses the current SPC+ system with rounded rails and is compatible with all current SP Connect Phone Cases.