I still have a classic SPC Handlebar Mount with straight rails. How can I upgrade to the improved system with half-rounded rails?Updated 10 days ago
You can easily upgrade your existing SP Connect SPC Handlebar Mount to the current system with rounded rails (SPC+) – without having to replace the entire mount.
Only the mounting head needs to be replaced, while the rest of the mount remains unchanged.
For the upgrade, you will need the following item:
Step-by-step instructions
1. Remove the existing SPC head (straight rails)
- Turn your mount over so you can see the underside of the mounting head
- Loosen the Allen screw on the underside
- Remove the existing SPC head with straight rails completely from the mount
2. Install the new SPC+ head (rounded rails)
- Place the Head SPC+ Handle Bar onto the mount
- Make sure the head sits correctly and flush
- Tighten the Allen screw on the underside again
- Use a torque of 1.2 Nm to ensure a secure and proper installation
Check fit
- Make sure the new head is firmly installed and does not move
- Before use, check that all screws are properly tightened
Result
After replacing the head, you will be using the latest SPC+ system with rounded rails and benefit from its improved features.