I still have a classic SPC Ballhead Mount Pro with straight rails. How can I upgrade to the improved system with rounded rails?Updated 2 months ago
You can easily upgrade your SP Connect SPC Ballhead Mount Pro to the current system with rounded rails (SPC+) without having to replace the entire mount.
Only the mounting head (Head) needs to be replaced. The rest of the mount remains unchanged.
For the upgrade, you will need the following product:
Step-by-step instructions
1. Remove the old SPC head (straight rails)
- Loosen the Allen screw on the mounting head using a suitable Allen key.
- Completely remove the existing SPC head from the Ballhead Mount Pro.
2. Install the new SPC+ head
- Insert the Head SPC+ Brake, Micro Bike, Uni Bike, Mirror into the mounting point of the Ballhead Mount Pro.
- Make sure that the head is correctly positioned and sits flush.
3. Secure the head
- Reinsert the Allen screw.
- Tighten the screw evenly.
- Use a torque of 3 Nm to ensure correct and secure installation.
Check the installation
- Make sure that the new mounting head is securely installed and does not move.
- Before use, check that the screw has been tightened correctly.
- Before every ride, check that the mount is securely installed.
Summary
After replacing the mounting head, your SP Connect Ballhead Mount Pro uses the current SPC+ system with rounded rails and is compatible with all current SP Connect Phone Cases and SP Connect universal solutions.