SP Connect EU logo
SP Connect EU logo

All articles

How is the Stem Mount Pro attached to the bike stem?Updated 2 months ago

The SP-Connect Stem Mount Pro is mounted directly to your bike’s stem – replacing the existing stem cap (Ahead cap).


Step-by-step instructions

1. Remove stem cap

  • Loosen the central bolt of your current stem cap
  • Remove the cap completely from the stem

2. Install Stem Mount Pro

  • Insert the M6 x 50 mm screw through the Stem Mount Pro into the stem
  • Tighten the screw with a torque of 2 Nm

Important note

  • Only loosen the central stem cap bolt
  • Do not loosen the side bolts on the stem
  • These secure the stem to the steerer tube and are safety-relevant
  • For headset adjustments, please follow the bike manufacturer’s instructions

Check installation

  • Make sure the Stem Mount Pro is securely mounted
  • Check that nothing moves before riding

Further information

You can find the detailed manual here:

Was this article helpful?
Yes
No