How is the Moto Mount Pro attached to the motorcycle handlebar?Updated 2 months ago
The SP Connect Moto Mount Pro can be quickly and easily attached to your motorcycle handlebar. The included diameter adapters allow the mount to be adjusted to different handlebar diameters.
Step-by-step instructions
1. Select the correct diameter adapter
- Select the included diameter adapter that matches the diameter of your motorcycle handlebar.
- For a handlebar diameter of 31.8 mm (1.25"), the clamp is mounted directly onto the handlebar without a diameter adapter. In this case, use the included 3M protective film to help prevent scratches on the handlebar.
2. Position the diameter adapter
- Place the diameter adapter at the desired position on the handlebar.
3. Attach the clamp
- Position the clamp around the diameter adapter or directly around the handlebar when mounting it on a 31.8 mm (1.25") handlebar.
4. Tighten the clamp
- Tighten the screws evenly and securely.
- Tighten the screws to a torque of 3 Nm to ensure a secure installation.
Compatible handlebar diameters
- 22.2 mm (7/8")
- 25.4 mm (1")
- 27.0 mm (1.063")
- 28.6 mm (1 1/8")
- 31.8 mm (1.25")
Check the installation
- Make sure the Moto Mount Pro is securely attached to the handlebar.
- Before every ride, check that the mount cannot rotate or move on the handlebar.
Summary
The SP Connect Moto Mount Pro is securely attached to the motorcycle handlebar using the appropriate diameter adapter. For handlebars with a diameter of 31.8 mm (1.25"), the mount is installed without a diameter adapter. Once the screws have been tightened to 3 Nm, the Moto Mount Pro is ready for use.